Criteria and test methods for determining the compatibility of cable-pulling lubricants (compounds) with cable jacket or other exterior cable covering are described in this standard. Cable-pulling lubricants are used to lower the friction on cable as it is pulled into conduit, duct, or directionally bored 3 holes. Compatibility is important because lubricants should not negatively interact with the cables they lubricate. Compatibility of lubricants with a variety of common cable coverings is considered.
- Standard Committee
- PE/IC - Insulated Conductors
- Status
- Active PAR
- PAR Approval
- 2017-02-17
- Superseding
- 1210-2004
Working Group Details
- Society
- IEEE Power and Energy Society
- Standard Committee
- PE/IC - Insulated Conductors
- Working Group
-
A08W/P1210_WG - Compatibility of Cable Jackets and Pulling Compounds Working Group
Learn More About A08W/P1210_WG - Compatibility of Cable Jackets and Pulling Compounds Working Group - IEEE Program Manager
- Michael Kipness
Contact Michael Kipness - Working Group Chair
- Michael Wright
Other Activities From This Working Group
Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.
No Active Projects
Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.
No Active Standards
These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.
No Superseded Standards
These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.
No Inactive-Withdrawn Standards
These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.
1210-2004
IEEE Standard Tests for Determining Compatibility of Cable-Pulling Lubricants With Wire and Cable
Criteria and test methods for determining the compatibility of cable-pulling lubricants (compounds) with cable jacket or other exterior cable covering are described in this standard. Cable pulling lubricants are used to lower the friction on cable as it is pulled into conduit, duct, or directionally bored holes. Compatibility is important because lubricants should not negatively interact with the cables they lubricate. Compatibility of lubricants with a variety of common cable coverings is considered. (An interpretation is available at http://standards-qa21.ieee.org/findstds/interps/1210-2004.html)
1210-2004/Cor 1-2014
IEEE Standard Tests for Determining Compatibility of Cable-Pulling Lubricants with Wire and Cable - Corrigendum 1
Criteria and test methods for determining the compatibility of cable-pulling lubricants (compounds) with cable jacket or other exterior cable covering are described in this standard. Cable-pulling lubricants are used to lower the friction on cable as it is pulled into conduit, duct, or directionally bored holes. Compatibility is important because lubricants should not negatively interact with the cables they lubricate. Compatibility of lubricants with a variety of common cable coverings is considered. This Corrigendum is to replace equations in 4.3 and 5.3 and to correct the legend in Table 4 in 4.5.