Superseded by IEEE Std 1189-2007. Methods for selecting the appropriate type of valve-regulated, immobilized-electrolyte, recombinant lead-acid battery for any of a variety of potential stationary float applications are described.
- Standard Committee
- PE/ESSB - Energy Storage & Stationary Battery Committee
- Status
- Superseded Standard
- Superseded by
- 1189-2007
- Board Approval
- 1996-07-31
- History
-
- ANSI Approved:
- 1997-02-06
- Published:
- 1996-09-11
Working Group Details
- Society
- IEEE Power and Energy Society
- Standard Committee
- PE/ESSB - Energy Storage & Stationary Battery Committee
- Working Group
-
WG_1189 - VRLA Selection Working Group
Learn More About WG_1189 - VRLA Selection Working Group - IEEE Program Manager
- Michael Kipness
Contact Michael Kipness - Working Group Chair
- Jason Wallis
Other Activities From This Working Group
Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.
P1189
Guide for Selection of Batteries for Standby Applications
This document specifies the key criteria used in the process of selecting a battery for a stationary standby application. Standby applications are those in which the battery spends the majority of its time at a high state of charge and only discharges in case of a failure of the primary power source. Various battery systems are discussed so that the user can make informed decisions on selection of batteries used in standby applications. For each category, the technology and the design of the battery are described in order to facilitate user selection. The specific advantages for particular applications are also listed. The most common battery technologies used in standby applications are divided into the following main categories: - Vented lead-acid (VLA) - Valve-regulated lead acid (VRLA) - Nickel-cadmium (Ni-Cd) - Lithium-based Limited information on other battery and non-battery energy storage technologies is provided. These technologies include, but are not limited to, the following: - Sodium-Beta - Flow - Flywheels This document covers all stationary standby applications. Example applications are discussed to illustrate the selection techniques described in this document. Those example applications are: - Uninterruptible Power Supply - Switchgear - Telecom outside plant The following subjects are beyond the scope of this guide: - Other non-battery devices such as fuel cells, electric double-layer capacitors, etc. - Energy storage (cycling) applications - Installation methods - Maintenance practices - Hazard mitigation practices - Battery and/or charger sizing - Design and protection of the dc system
Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.
No Active Standards
These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.
No Superseded Standards
These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.
No Inactive-Withdrawn Standards
These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.
1189-2007
IEEE Guide for Selection of Valve-Regulated Lead-Acid (VRLA) Batteries for Stationary Applications
Revision of IEEE Std 1187-1996. This guide describes methods for selecting the appropriate type of valve-regulated, immobilized-electrolyte, recombinant lead-acid battery for any of a variety of stationary float applications. The purpose of this document is to ensure that the reader is aware of all significant issues that should be considered when selecting VRLA batteries, so that the user might make an informed decision.