Recommendations and requirements for the design and applications of power electronics in land-based (onshore) and marine (offshore) electrical power systems are provided in this standard. A wide range of power electronics equipment with aggregated power ratings at and above 100 kW with voltages equal or less than 52 kV (ac) or (dc) is covered. Existing engineering practices, analytical methods, and performance characteristics are described. Applicable international and local standards are referenced with appropriate guidance to provide users of the standard with correct criteria for design, testing, and maintenance necessary for reliable operation of integrated power systems.
- Standard Committee
- IAS/PCI - Petroleum and Chemical Industry
- Joint Sponsors
-
PEL/SC
- Status
- Active Standard
- PAR Approval
- 2014-06-12
- Superseding
- 1662-2008
- Board Approval
- 2016-09-22
- History
-
- Published:
- 2017-03-09
Working Group Details
- Society
- IEEE Industry Applications Society
- Standard Committee
- IAS/PCI - Petroleum and Chemical Industry
- Working Group
-
1662_WG - Power Electronics Working Group
Learn More About 1662_WG - Power Electronics Working Group - IEEE Program Manager
- Patricia Roder
Contact Patricia Roder - Working Group Chair
- Yuri Khersonsky
Other Activities From This Working Group
Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.
P1662
IEEE Draft Recommended Practice for the Design and Application of Power Electronics in Electrical Power Systems
Recommendations and requirements for the design and applications of power electronics in land-based (onshore) and marine (offshore) electrical power systems are provided in this standard. A wide range of power electronics equipment with aggregated power ratings at and above 100 kW with voltages equal or less than 52 kV (ac) or (dc) is covered. Existing engineering practices, analytical methods, and performance characteristics are described. Applicable international and local standards are referenced with appropriate guidance to provide users of the standard with correct criteria for design, testing, and maintenance necessary for reliable operation of integrated power systems.
Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.
1826-2020
IEEE Standard for Power Electronics Open System Interfaces in Zonal Electrical Distribution Systems Rated Above 100 kW
Open system interfaces for high power electronics equipment used in zonal electrical distribution systems rated above 100 kW are identified in this standard. The required power, monitoring, information exchange, control, and protection interfaces are based on technological maturity, accepted practices, and allowances for future technology insertions. Also, rigorous assessment mechanisms, interface control management, and proactive conformance testing that shall be used to verify and validate open systems to enable plug-and-play operability independently of the components' origin are defined. Airports, hospitals, major data processing centers (especially those using uninterruptible power supply), broadcast systems, and maritime vessels and platforms are applications covered by this standard. Existing terrestrial utility power systems that do not yet contain the electronic power interfaces and high-speed communication networks that are essential to use this standard shall be upgraded by its application.
These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.
1662-2008
IEEE Guide for the Design and Application of Power Electronics in Electrical Power Systems on Ships
This document summarizes current electrical engineering methods and practices for applying power electronics in Electrical Power Systems on Ships. It describes analytical methods, preferred parameters and performance characteristics from a common frame of reference for reliable integrated marine electrical power systems
1826-2012
IEEE Standard for Power Electronics Open System Interfaces in Zonal Electrical Distribution Systems Rated Above 100 kW
Open system interfaces for high power electronics equipment used in zonal electrical distribution systems rated above 100 kW are identified in this standard. The required power, monitoring, information exchange, control, and protection interfaces are based on technological maturity, accepted practices, and allowances for future technology insertions. Also, rigorous assessment mechanisms, interface control management, and proactive conformance testing that shall be used to verify and validate open systems to enable plug-and-play operability independently of the components' origin are defined. Airports, hospitals, major data processing centers (especially those using uninterruptible power supply), broadcast systems, and maritime vessels and platforms are applications covered by this standard. Existing terrestrial utility power systems that do not yet contain the electronic power interfaces and high-speed communication networks that are essential to use this standard shall be upgraded by its application.
These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.
No Inactive-Withdrawn Standards
These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.
No Inactive-Reserved Standards