General guidelines toward the preparations of a functional specification of transmission fixed-series capacitor (FSC) banks using overvoltage protection based on three technologies are provided. The three technologies are: - metal oxide varistors - metal oxide varistors with a forced-triggered bypass gaps, and thyristor protected series capacitors - thyristor protected series capacitor This guide does not apply comprehensively to thyristor-controlled series capacitors.
- Standard Committee
- PE/T&D - Transmission and Distribution
- Status
- Active Standard
- PAR Approval
- 2007-08-22
- Board Approval
- 2013-12-11
- History
-
- Published:
- 2014-03-07
Working Group Details
- Society
- IEEE Power and Energy Society
- Standard Committee
- PE/T&D - Transmission and Distribution
- Working Group
-
Capacitor-1726_WG - Capacitors Committee
Learn More About Capacitor-1726_WG - Capacitors Committee - IEEE Program Manager
- Michael Kipness
Contact Michael Kipness - Working Group Chair
- Biswajit Singh
Other Activities From This Working Group
Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.
P1726
Guide for the Functional Specification of Fixed-Series Capacitor Banks for Transmission System Applications
This guide provides general guidelines toward the preparations of a functional specification of transmission fixed-series capacitor (FSC) banks using overvoltage protection based on three technologies: - metal oxide varistors - metal oxide varistors with a forced-triggered bypass gaps - thyristor valve bypass The commercial aspects of the specification for a particular project are outside the scope of this guide.
Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.
No Active Standards
These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.
18-2002
IEEE Standard for Shunt Power Capacitors
Capacitors rated 216 V or higher, 2.5 kvar or more, and designed for shunt connection toalternating-current transmission and distribution systems operating at a nominal frequency of 50 Hzor 60 Hz, within the guidelines of IEEE Std 1036-1992, are considered.
These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.
No Inactive-Withdrawn Standards
These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.
No Inactive-Reserved Standards