This standard describes a parameterized and abstracted power model enabling system, software, and hardware intellectual property (IP)-centric power analysis and optimization. It defines concepts for the development of parameterized, accurate, efficient, and complete power models for systems and hardware IP blocks usable for system power analysis and optimization. These concepts include, but are not limited to, process, voltage, and temperature (PVT) independence; power and thermal management interface; and workload and architecture parameterization. Such models are suitable for use in software development flows and hardware design flows, as well as for representing both pre-silicon-estimated and post-silicon-measured data. This standard also defines the necessary requirements for the information content of parameterized, accurate, efficient, and complete power models to help guide development and usage of other related power, workload, and functional modeling standards, such as UPF IEEE Std 1801(TM)-2018, SystemC IEEE Std 1666(TM)-2016, and SystemVerilog IEEE Std 1800(TM)-2017. Beyond defining the concepts and related standard requirements, this standard also recommends the use of other relevant design flow standards (e.g., IP-XACT IEEE Std 1685(TM)-2014 [B2]2), with the objective of enabling more complete and usable power-aware design flows.
- Standard Committee
- C/DA - Design Automation
- Status
- Active PAR
- PAR Approval
- 2020-02-13
- Superseding
- 2416-2019
Working Group Details
- Society
- IEEE Computer Society
- Standard Committee
- C/DA - Design Automation
- Working Group
-
System Level Power Modeling - Power Modeling: Standard for Enabling System Level Analysis
Learn More About System Level Power Modeling - Power Modeling: Standard for Enabling System Level Analysis - IEEE Program Manager
- Vanessa Lalitte
Contact Vanessa Lalitte - Working Group Chair
- Nagu Dhanwada
Other Activities From This Working Group
Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.
No Active Projects
Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.
2416-2019
IEEE Standard for Power Modeling to Enable System-Level Analysis
In this standard, a parameterized and abstracted power model enabling system, software, and hardware intellectual property (IP)u2013centric power analysis and optimization are described. Concepts and constructs are defined for the development of parameterized, accurate, efficient, and complete power models for systems and hardware IP blocks usable for system power analysis and optimization. Process, voltage, and temperature (PVT) independence; power and thermal management interface; and workload and architecture parameterization are some of the concepts included.
These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.
No Superseded Standards
These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.
No Inactive-Withdrawn Standards
These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.
No Inactive-Reserved Standards