It is required that Class 1E motors, with their interfaces, meet or exceed the specified performance requirements throughout their service life. This is accomplished through a program that includes, but is not limited to, design, qualification, production quality control, shipping, storage, installation, operation, maintenance, periodic testing, and surveillance. This standard addresses the qualification portion of the program. It discusses the requirement for maintenance, repair, and surveillance of motors to maintain qualification of motors throughout their service life but does not provide detailed guidance about how these programmatic items must be implemented and maintained. The qualification requirements of this standard, when met, demonstrate and document the ability of the motor and/or insulation system to perform its safety function(s) under specified service conditions.
- Standard Committee
- PE/NPE - Nuclear Power Engineering
- Status
- Active PAR
- PAR Approval
- 2019-03-21
- Superseding
- 334-2006
Working Group Details
- Society
- IEEE Power and Energy Society
- Standard Committee
- PE/NPE - Nuclear Power Engineering
- Working Group
-
WG_2.2 - Working Group on Qualification of Motors
Learn More About WG_2.2 - Working Group on Qualification of Motors - IEEE Program Manager
- Christian Orlando
Contact Christian Orlando - Working Group Chair
- JAMES DEAN
Other Activities From This Working Group
Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.
No Active Projects
Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.
No Active Standards
These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.
334-1994
IEEE Standard for Qualifying Continuous Duty Class 1E Motors for Nuclear Power Generating Stations
Superseded by IEEE Std 334-2006 Methods and requirements for qualifying continuous duty Class 1E motors for use in nuclear power generating stations are provided. The methods are used for qualifying motors, extending the qualification, and updating the qualification if the motor's design or specified service conditions are modified. The requirements include the principles, procedures, and methods of qualification as they relate to continuous duty Class 1E polyphase squirrel cage ac motors.
These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.
No Inactive-Withdrawn Standards
These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.
334-2006
IEEE Standard for Qualifying Continuous Duty Class 1E Motors for Nuclear Power Generating Stations
Reaffirmed March 2012. It is required that Class 1E motors, with their interfaces, meet or exceed the specified performance requirements throughout their service life. This is accomplished through a program that includes, but is not limited to, design, qualification, production quality control, shipping, storage, installation, operation, maintenance, periodic testing, and surveillance. This standard addresses the qualification portion of the program. It discusses the requirement for maintenance, repair, and surveillance of motors to maintain qualification of motors throughout their installed life but does not provide detailed guidance about how these programmatic items must be implemented and maintained. The qualification requirements of this standard, when met, demonstrate and document the ability of the motor and/or insulation system to perform its safety function(s) under specified service conditions.