Very low frequency (VLF) withstand and other diagnostic tests and measurements that are performed using VLF energization in the field on shielded power cable systems are described in this guide. Whenever possible, cable systems are treated in a similar manner to individual cables. Tables are included as an aid to identifying the effectiveness of the VLF ac voltage test for various cable system insulation problems.
- Standard Committee
- PE/IC - Insulated Conductors
- Status
- Active Standard
- PAR Approval
- 2011-09-10
- Superseding
- 400.2-2004
- Board Approval
- 2013-03-06
- History
-
- ANSI Approved:
- 2015-07-22
- Published:
- 2013-06-09
Working Group Details
- Society
- IEEE Power and Energy Society
- Standard Committee
- PE/IC - Insulated Conductors
- Working Group
-
F03W/P400.2_WG - Working group for the Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF)
Learn More About F03W/P400.2_WG - Working group for the Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF) - IEEE Program Manager
- Michael Kipness
Contact Michael Kipness - Working Group Chair
- Robert Hampton
Other Activities From This Working Group
Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.
P400.2
IEEE Draft Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF) (less than 1 Hz)
Very low frequency (VLF) withstand and other diagnostic tests and measurements that are performed using VLF energization in the field on shielded power cable systems are described in this guide. Whenever possible, cable systems are treated in a similar manner to individual cables. Tables are included as an aid to identifying the effectiveness of the VLF ac voltage test for various cable system insulation problems.
Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.
No Active Standards
These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.
No Superseded Standards
These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.
No Inactive-Withdrawn Standards
These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.
No Inactive-Reserved Standards