Specific test requirements for qualifying electrical resistance trace heating for commercial service are provided in this standard. A basis for electrical and thermal design is included, heating device characteristics are addressed, and installation and maintenance requirements are detailed. Recommendations and requirements for unclassified heating device applications are provided.
- Standard Committee
- IAS/PCI - Petroleum and Chemical Industry
- Status
- Superseded Standard
- PAR Approval
- 2007-09-27
- Superseded by
- 515.1-2022
- Superseding
- 515.1-2005
- Board Approval
- 2012-10-19
- History
-
- Published:
- 2012-12-19
Working Group Details
- Society
- IEEE Industry Applications Society
- Standard Committee
- IAS/PCI - Petroleum and Chemical Industry
- Working Group
-
515.1_WG - Working Group for the Testing, Design, Installation, and Maintenance of Electrical Resistance Heat Tracing for Commercial Applications
Learn More About 515.1_WG - Working Group for the Testing, Design, Installation, and Maintenance of Electrical Resistance Heat Tracing for Commercial Applications - IEEE Program Manager
- Patricia Roder
Contact Patricia Roder - Working Group Chair
- John Turner
Other Activities From This Working Group
Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.
No Active Projects
Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.
515.1-2022
IEEE Standard for the Testing, Design, Installation, and Maintenance of Electrical Resistance Trace Heating for Commercial Applications
Specific test requirements for qualifying electrical resistance trace heating for commercial service are provided in this standard. A basis for electrical and thermal design is included, heating device characteristics are addressed, and installation and maintenance requirements are detailed. Recommendations and requirements for unclassified heating device applications are provided.
These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.
No Superseded Standards
These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.
No Inactive-Withdrawn Standards
These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.
No Inactive-Reserved Standards