Procedures for demonstrating the adequacy of new Class 1E transformers, located in a mild environment of a nuclear power generating station, to perform their required safety functions under postulated service conditions are presented. Single- and three-phase transformers rated 601 V to 15 000 V for the highest voltage winding and up to 2500 kVA (self-cooled rating) are covered. Because of the conservative approach used in the development of this new standard for new transformers, the end-point criteria cannot be used for in-service transformers.
- Standard Committee
- PE/TR - Transformers
- Status
- Active Standard
- PAR Approval
- 2013-02-01
- Superseding
- 638-1992
- Board Approval
- 2013-12-11
- History
-
- Published:
- 2014-03-11
Working Group Details
- Society
- IEEE Power and Energy Society
- Standard Committee
- PE/TR - Transformers
- Working Group
-
PwrTrans-638 - Power Transformers - Qualification of Class 1E Transformers for Nuclear Power Generating Stations
Learn More About PwrTrans-638 - Power Transformers - Qualification of Class 1E Transformers for Nuclear Power Generating Stations - IEEE Program Manager
- Patrycja Jarosz
Contact Patrycja Jarosz - Working Group Chair
- Craig Swinderman
Other Activities From This Working Group
Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.
No Active Projects
Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.
No Active Standards
These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.
No Superseded Standards
These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.
No Inactive-Withdrawn Standards
These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.
No Inactive-Reserved Standards