Various good practices that will enable users to improve their ability to assemble and erect self-supporting and guyed steel or aluminum lattice and tubular steel structures are presented. Construction considerations after foundation installation, and up to the conductor stringing operation, are also covered. The guide focuses on the design and construction considerations for material delivery, assembly and erection of metal transmission structures, and the installation of insulators and hardware. This guide is intended to be used as a reference source for parties involved in the ownership, design, and construction of transmission structures.
- Sponsor Committee
- PE/T&D - Transmission and Distribution
Learn More About PE/T&D - Transmission and Distribution - Status
- Inactive-Reserved Standard
- PAR Approval
- 1994-06-14
- Superseding
- 951-1988
- Board Approval
- 1996-12-10
- History
-
- ANSI Approved:
- 1997-05-15
- Published:
- 1997-03-28
- Reaffirmed:
- 2009-09-11
- Inactivated Date:
- 2020-03-05
Working Group Details
- Society
- IEEE Power and Energy Society
Learn More About IEEE Power and Energy Society - Sponsor Committee
- PE/T&D - Transmission and Distribution
Learn More About PE/T&D - Transmission and Distribution - Working Group
-
ADMIN_8214 - Project Administration_8214
- IEEE Program Manager
- Michael Kipness
Contact Michael Kipness - Working Group Chair
- Robert Millies
Other Activities From This Working Group
Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.
P951
Guide for the Assembly and Erection of Metal Transmission Structures
This guide presents best practices for the assembly and erection of self-supporting and guyed steel or aluminum lattice and tubular steel structures. This guide covers construction topics after foundation installation and up to the conductor stringing operation.
Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.
No Active Standards
These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.
No Superseded Standards
These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.
No Inactive-Withdrawn Standards
These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.
No Inactive-Reserved Standards