Information of special relevance to planning, design, testing, installation, operation and maintenance of gas-insulated substations (GIS) and equipment is provided in this guide, which is intended to supplement IEEE Std C37.122(TM). This guide is applicable to all gas-insulated substations (GIS) above 52 kV. However, the importance of topics covered varies with application category. For example, the issues related to advanced field test techniques and very fast transients (VFT) are of particular interest for extra-high voltage (EHV) gas-insulated substations (GIS).
- Standard Committee
- PE/SUB - Substations
- Status
- Active Standard
- PAR Approval
- 2008-09-26
- Superseding
- C37.122.1-1993
- Board Approval
- 2014-11-03
- History
-
- Published:
- 2014-12-05
Working Group Details
- Society
- IEEE Power and Energy Society
- Standard Committee
- PE/SUB - Substations
- Working Group
-
SCK0 - High Voltage Gas-Insulated Substations Working Group
Learn More About SCK0 - High Voltage Gas-Insulated Substations Working Group - IEEE Program Manager
- Patricia Roder
Contact Patricia Roder
Other Activities From This Working Group
Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.
No Active Projects
Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.
No Active Standards
These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.
1125-1993
IEEE Guide for Moisture Measurement and Control in SF6 Gas-Insulated Equipment
Guidelines for moisture level measurement, moisture data interpretation, and moisture control in gas-insulated transmission class equipment (GIE) are provided.
C37.122-1993
IEEE Standard for Gas-Insulated Substations
Guidance in the application of relays and relaying schemes for protection against stator ground faults on high-impedance grounded generators is provided.
C37.122.1-1993
IEEE Guide for Gas-Insulated Substations
The technical requirements for the design, fabrication, testing, and installation of a gas-insulated substation (GIS) are covered. Parameters to be supplied by the purchaser are suggested, and technical requirements for the design, fabrication, testing, and installation to be furnished by the manufacturer are established.
C37.123-1996
IEEE Guide to Specifications for Gas-Insulated, Electric Power Substation Equipment
Technical requirements for the design, fabrication, testing, and installation of a gas-insulated substation (GIS) are provided. Parameters to be supplied by the purchaser and the technical requirements for the design, fabrication, testing, and installation to be furnished by the manufacturer are discussed. Environmental conditions, general and specific equipment requirements, and a proposal data sheet form are provided to aid the user.
These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.
No Inactive-Withdrawn Standards
These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.
1416-1998
IEEE Recommended Practice for the Interface of New Gas-Insulated Equipment in Existing Gas-Insulated Substations
Reaffirmed 2004 Recommendations for the connection of a gas-insulated substation to another gas-insu- lated substation of a different make are given.