Guidance for technical requirements for the design, fabrication, testing, and installation of indoor gas-insulated substations (GIS) 1 kV up to 52 kV is provided in this standard. Parameters to be supplied by the purchaser are suggested and technical requirements for the design, fabrication, testing, and installations to be furnished by the manufacturer are established.
- Standard Committee
- PE/SUB - Substations
- Joint Sponsors
-
PE/SWG
- Status
- Active Standard
- PAR Approval
- 2019-06-13
- Superseding
- C37.122.2-2011
- Board Approval
- 2022-11-08
- History
-
- Published:
- 2023-04-28
Working Group Details
- Society
- IEEE Power and Energy Society
- Standard Committee
- PE/SUB - Substations
- Working Group
-
WGK3 - Application of Gas-Insulated Substations 1 kV to 52 kV
Learn More About WGK3 - Application of Gas-Insulated Substations 1 kV to 52 kV - IEEE Program Manager
- Patricia Roder
Contact Patricia Roder - Working Group Chair
- Eldridge Byron
Other Activities From This Working Group
Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.
No Active Projects
Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.
No Active Standards
These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.
No Superseded Standards
These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.
No Inactive-Withdrawn Standards
These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.
C37.122.2-2011
IEEE Guide for the Application of Gas-Insulated Substations 1 kV to 52 kV
The technical requirements for the design, fabrication, testing, and installation of indoor gas-insulated substations (GIS) 1 kV up to 52 kV are covered. Parameters to be supplied by the purchaser are suggested and technical requirements for the design, fabrication, testing, and installations to be furnished by the manufacturer are established.