Required procedures for performing design tests for high-voltage distribution-class and power-class fuses, as well as for fuse disconnecting switches and enclosed single-pole air switches are specified. These design tests, as appropriate to a particular device, include the following test types-dielectric, interrupting, load-break, making current, radio-influence, short-time current, temperature-rise, time-current, mechanical, and liquid-tightness.
- Standard Committee
- PE/SWG - Switchgear
- Status
- Superseded Standard
- Superseded by
- C37.41-2008
- Superseding
- C37.41-1994
- Board Approval
- 2000-01-30
- History
-
- ANSI Approved:
- 2000-06-07
- Published:
- 2000-11-30
Working Group Details
- Society
- IEEE Power and Energy Society
- Standard Committee
- PE/SWG - Switchgear
- Working Group
-
HVF-WG_C37.41 - HVF - IEEE Standard for Design Tests and Specifications for High-Voltage (> 1000 V) Fuses and Accessories
Learn More About HVF-WG_C37.41 - HVF - IEEE Standard for Design Tests and Specifications for High-Voltage (> 1000 V) Fuses and Accessories - Working Group Chair
- Sterlin Cochran
Other Activities From This Working Group
Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.
No Active Projects
Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.
C37.41-2016
IEEE Standard Design Tests for High-Voltage (>1000 V) Fuses and Accessories
Revision of IEEE C37.41-2008 and supersedes IEEE C37.40-2003. Required procedures for performing design tests for high-voltage fuses, as well as for fuse disconnecting switches, are specified. These design tests, as appropriate to a particular device, include the following test types: dielectric, interrupting, radio-influence, temperature-rise, time-current, manual-operation, liquid-tightness, thermal-cycle, bolt-torque, withstand tests for motor circuit fuses, expulsion fuses using polymeric insulators, load-break, and short-time current.
C37.41-2016/Cor 1-2017
IEEE Standard Design Tests for High-Voltage (>1000 V) Fuses and Accessories Corrigenda 1
Corrigenda concerning required procedures for performing design tests for high-voltage fuses are specified. These design tests, are appropriate to expulsion fuses, and cover interrupting tests and fuses using polymeric insulators.
These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.
C37.41-2008
IEEE Standard Design Tests for High-Voltage (>1000 V) Fuses, Fuse and Disconnecting Cutouts, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Fuse Links and Accessories Used with These Devices
Required procedures for performing design tests for high-voltage distribution class and power class fuses, as well as for fuse-disconnecting switches and enclosed single-pole air switches, are specified. These design tests, as appropriate to a particular device, include the following test types: dielectric, interrupting, load-break, radio-influence, short-time current, temperature rise, time-current, manual operation, thermal-cycle, bolt torque, and liquid tightness.
These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.
No Inactive-Withdrawn Standards
These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.
No Inactive-Reserved Standards