This IEEE Standards product is part of the C37 family on Switchgear, Substations and Protective Relays. Methods and requirements for qualifying switchgear assemblies for indoor areas outside of the containment area in nuclear power generating stations are described. These assemblies include metal-enclosed low-voltage power circuit breaker switchgear assemblies, metal-clad switchgear assemblies, and metal-enclosed interrupter switchgear assemblies. This standard amplifies the general requirements of ANSI/IEEE 323-1983, IEEE Standard for Qualifying Class 1E Equipment for Nuclear Power Generating Stations, as they apply to Class 1E switchgear assemblies.
- Standard Committee
- PE/SWG - Switchgear
- Status
- Superseded Standard
- Superseded by
- C37.82-2017
- Board Approval
- 1983-12-08
- History
-
- ANSI Approved:
- 1987-02-05
- Published:
- 1983-03-07
- Reaffirmed:
- 2009-12-09
Working Group Details
- Society
- IEEE Power and Energy Society
- Standard Committee
- PE/SWG - Switchgear
- Working Group
-
SASC-WG_C37.82 - SASC - IEEE Standard for the Qualification of Switchgear Assemblies for Class 1E Applications in Nuclear Power Generating Stations
Learn More About SASC-WG_C37.82 - SASC - IEEE Standard for the Qualification of Switchgear Assemblies for Class 1E Applications in Nuclear Power Generating Stations - Working Group Chair
- Russell Boyce
Other Activities From This Working Group
Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.
PC37.82
Standard for the Qualification of Switchgear Assemblies for Class 1E Applications in Nuclear Power Generating Stations
This document describes the methods and requirements for qualifying switchgear assemblies for indoor areas outside of the containment in nuclear power generating stations. These assemblies include the following: a) Metal-enclosed low-voltage power circuit breaker switchgear assemblies, as defined in IEEE Std C37.20.1; b) Metal-clad switchgear assemblies, as defined in IEEE Std C37.20.2; b) Metal-enclosed bus, as defined in IEEE Std C37.23; c) Metal-enclosed interrupter switchgear assemblies (1 kV to 38 kV), as defined in IEEE Std C37.20.3
Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.
C37.82-2017
IEEE Standard for the Qualification of Switchgear Assemblies for Class 1E Applications in Nuclear Power Generating Stations
The methods and requirements for qualifying switchgear assemblies for indoor areas outside of the containment in nuclear power generating stations are described in this document. These assemblies include: metal-enclosed low-voltage power circuit breaker switchgear assemblies, as defined in IEEE Std C37.20.1™; metal-clad switchgear assemblies, as defined in IEEE Std C37.20.2™; metal-enclosed bus, as defined in IEEE Std C37.23™; and metal-enclosed interrupter switchgear assemblies, as defined in IEEE Std C37.20.3™.
These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.
No Superseded Standards
These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.
No Inactive-Withdrawn Standards
These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.
No Inactive-Reserved Standards