An optical interface for use between teleprotection and digital multiplexer equipment Keywords that can operate at a data rate of N × 64 kbps where N = 1, 2…12 is described in this standard. Requirements for both physical connection and the communications timing are also included.
- Standard Committee
- PE/PSCC - Power System Communications and Cybersecurity
- Joint Sponsors
-
PE/PSCC
- Status
- Active Standard
- PAR Approval
- 2014-06-12
- Superseding
- C37.94-2002
- Board Approval
- 2017-03-23
- History
-
- Published:
- 2017-07-21
Working Group Details
- Society
- IEEE Power and Energy Society
- Standard Committee
- PE/PSCC - Power System Communications and Cybersecurity
- Working Group
-
P0_C37.94_WG - Optical Fiber Interfaces Working Group
Learn More About P0_C37.94_WG - Optical Fiber Interfaces Working Group - IEEE Program Manager
- Tom Thompson
Contact Tom Thompson - Working Group Chair
- Marc Benou
Other Activities From This Working Group
Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.
No Active Projects
Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.
No Active Standards
These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.
C37.94-2002
IEEE Standard for N Times 64 Kilobit Per Second Optical Fiber Interfaces Between Teleprotection and Multiplexer Equipment
This IEEE Standard is part of the C37 Family on Switchgear, Substations & Protective Relays. Project scope: This standard describes the interconnection details for N times 64 kilobit per second connections of teleprotection equipment to digital multiplexers using optical fiber. Requirements for both physical connection and the communications timing are also included. Project purpose: The purpose of this standard is to define an interconnection of different vendors' relays with different vendors' multiplex equipment, without any restriction on the ocntent of the N times 64 kilobit per second data, using up to 2 kilometer of 50 micrometer or 62.5 micrometer multimode fiber.
These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.
No Inactive-Withdrawn Standards
These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.
No Inactive-Reserved Standards