Electrical, mechanical, and safety requirements of ventilated, non-ventilated, and sealed dry-type distribution and power transformers or autotransformers (single and polyphase, with a voltage of 601 V or higher in the highest voltage winding) are described in this standard.
- Standard Committee
- PE/TR - Transformers
- Status
- Active Standard
- PAR Approval
- 2016-05-12
- Superseding
- C57.12.01-2015
- Board Approval
- 2020-09-24
- History
-
- Published:
- 2020-11-24
Working Group Details
- Society
- IEEE Power and Energy Society
- Standard Committee
- PE/TR - Transformers
- Working Group
-
DryType-WGC57.12.01 - Dry Type Transformers - General Req. Working Group
Learn More About DryType-WGC57.12.01 - Dry Type Transformers - General Req. Working Group - IEEE Program Manager
- Patrycja Jarosz
Contact Patrycja Jarosz - Working Group Chair
- Robert Ballard
Other Activities From This Working Group
Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.
PC57.12.01
Standard for General Requirements for Dry-Type Distribution and Power Transformers
This standard defines the electrical and mechanical requirements of single and polyphase ventilated, nonventilated, and sealed dry-type distribution and power transformers or autotransformers, with a voltage of 601V or higher in the highest voltage winding. This standard applies to all dry-type transformers, including those with solid-cast and/or resin encapsulated windings except as follows:na) Instrument transformersnb) Step and induction-voltage regulatorsnc) Arc-furnace transformersnd) Rectifier transformersne) Specialty and general-purpose transformersnf) Mine transformersng) Testing transformersnh) Welding transformersni) Drive transformersnj) Inverter transformers
Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.
No Active Standards
These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.
C57.12.01-1979
American National Standard General Requirements for Dry-Type Distribution and Power Transformers
Electrical, mechanical, and safety requirements of ventilated, nonventilated, and sealed dry-type distribution and power transformers or autotransformers, single and polyphase, with a voltage of 601 V or higher in the highest voltage winding, are described. Information that can be used as a basis for the establishment of performance, interchangeability, and safety requirements of equipment described, and for assistance in the proper selection of such equipment, is given.
C57.12.01-1998
IEEE Standard General Requirements for Dry-Type Distribution and Power Transformers Including Those with Solid Cast and/or Resin Encapsulated Windings
Superseded by IEEE Std C57.12.01-2005 Electrical, mechanical, and safety requirements of ventilated, nonventilated, and sealed dry-type distribution and power transformers or autotransformers, single and polyphase, with a voltage of 601 V or higher in the highest voltage winding, are described. Information that can be used as a basis for the establishment of performance, interchangeability, and safety requirements of equipment described, and for assistance in the proper selection of such equipment, is given.
C57.12.01-2005
Standard General Requirements for Dry-Type Distribution and Power Transformers Including Those with Solid Cast and/or Resin Encapsulated Windings
Electrical, mechanical, and safety requirements of ventilated, non-ventilated, and sealed dry-type distribuion and power transformers or auto transformers (single and polyphase, with a voltage of 601 V or higher in the highest voltage winding) are described.
C57.12.01-2015
IEEE Standard for General Requirements for Dry-Type Distribution and Power Transformers
Electrical and mechanical requirements of ventilated, non-ventilated, and sealed dry-type distribution and power transformers or autotransformers (single and polyphase, with a voltage of 601 V or higher in the highest voltage winding) are described.
These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.
No Inactive-Withdrawn Standards
These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.
No Inactive-Reserved Standards