Conformance tests and requirements for the coating integrity of carbon steel pole-mounted enclosures containing apparatus energized in excess of 600 V, and not for application in coastal or other severe environments, are specified in this standard. These enclosures are typically located out of reach of the general public, and include, but are not limited to, the following types of equipment enclosures: pole-mounted distribution transformers, pole-mounted switches, pole-mounted regulators, pole-mounted metering equipment, pole-mounted reclosers, and pole-mounted switchgear.
- Standard Committee
- PE/TR - Transformers
- Joint Sponsors
-
PE/SWG
- Status
- Active Standard
- PAR Approval
- 2019-02-08
- Superseding
- C57.12.31-2010
- Board Approval
- 2020-12-03
- History
-
- Published:
- 2021-02-26
Working Group Details
- Society
- IEEE Power and Energy Society
- Standard Committee
- PE/TR - Transformers
- Working Group
-
Dist-WGC57.12.31 - Distribution - Encl Integrity - Pole Mtd. Working Group
Learn More About Dist-WGC57.12.31 - Distribution - Encl Integrity - Pole Mtd. Working Group - IEEE Program Manager
- Patrycja Jarosz
Contact Patrycja Jarosz - Working Group Chair
- Daniel Mulkey
Other Activities From This Working Group
Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.
No Active Projects
Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.
C57.12.30-2020
IEEE Standard for Pole-Mounted Equipment--Enclosure Integrity for Coastal Environments
Conformance tests and requirements for the coating integrity of pole-mounted enclosures containing apparatus energized in excess of 600 V, and for application in coastal environments, are specified in this standard. These enclosures are typically located out of reach of the general public, and include, but are not limited to, the following types of equipment enclosures: pole-mounted distribution transformers, pole-mounted switches, pole-mounted regulators, pole-mounted metering equipment, pole-mounted reclosers, and pole-mounted switchgear.
These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.
C57.12.30-2010
IEEE Standard for Pole-Mounted Equipment--Enclosure Integrity for Coastal Environments
Conformance tests and requirements for the coating integrity of pole-mounted enclosures for application in coastal environments containing apparatus energized in excess of 600 V, typically located out of reach of the general public, including, but not limited to, the following types of equipment enclosures: pole-mounted distribution transformers, pole-mounted switches, pole-mounted regulators, pole-mounted metering equipment, pole-mounted reclosers, and pole-mounted switchgear, are discussed.
C57.12.31-2002
IEEE Standard for Pole Mounted Equipment - Enclosure Integrity
Conformance tests and requirements for the coating integrity of carbon steel pole mounted enclosures containing apparatus energized in excess of 600 volts, typically located out of reach of the general public, including, but not limited to, the following types of equipment enclosures: polemounted distribution transformers, pole-mounted switches, pole-mounted regulators, pole-mounted metering equipment, pole-mounted reclosers, and pole-mounted switchgear are covered.
C57.12.31-2010
IEEE Standard for Pole-Mounted Equipment--Enclosure Integrity
Conformance tests and requirements for the coating integrity of carbon steel polemounted enclosures containing apparatus energized in excess of 600 V, typically located out of reach of the general public, including, but not limited to, the following types of equipment enclosures: pole-mounted distribution transformers, pole-mounted switches, pole-mounted regulators, pole-mounted metering equipment, pole-mounted reclosers, and pole-mounted switchgear, are covered.
C57.12.31-2010/Cor 1-2014
IEEE Standard for Pole-Mounted Equipment--Enclosure Integrity - Corrigendum 1: Correction to the SCAB Corrosion Test in 4.5.6
An error has been identified in the 2010 published version of IEEE Std C57.12.31(TM)-2010. The number of cycles included in one of the corrosion tests is not correct. This error needs to be corrected which is a critical requirement of the standard.
These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.
No Inactive-Withdrawn Standards
These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.
No Inactive-Reserved Standards