The performance, electrical and mechanical interchangeability, and the safety of the equipment are covered. The proper selection of such equipment is established as a basis for use in this standard. Certain electrical, dimensional, and mechanical characteristics are described; and certain safety features of three-phase, 60 Hz, low-voltage (600 V and below) network protectors are taken into consideration. This equipment is used for automatically connecting and disconnecting a network transformer from a secondary spot or grid network.
- Standard Committee
- PE/TR - Transformers
- Status
- Active Standard
- PAR Approval
- 2010-06-17
- Superseding
- C57.12.44-2005
- Board Approval
- 2014-03-27
- History
-
- Published:
- 2014-06-13
Working Group Details
- Society
- IEEE Power and Energy Society
- Standard Committee
- PE/TR - Transformers
- Working Group
-
STNP WGC57.12.44 - STNP - Underground TR & NW Protect - Std. Req. for Sec. Network Protectors Working Group
Learn More About STNP WGC57.12.44 - STNP - Underground TR & NW Protect - Std. Req. for Sec. Network Protectors Working Group - IEEE Program Manager
- Malia Zaman
Contact Malia Zaman - Working Group Chair
- Mark Faulkner
Other Activities From This Working Group
Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.
PC57.12.44
IEEE Draft Standard Requirements for Secondary Network Protectors
The performance, electrical and mechanical interchangeability, and the safety of the equipment are covered. The proper selection of such equipment is established as a basis for use in this standard. Certain electrical, dimensional, and mechanical characteristics are described; and certain safety features of three-phase, 60 Hz, low-voltage (600 V and below) network protectors are taken into consideration. This equipment is used for automatically connecting and disconnecting a network transformer from a secondary spot or grid network.
Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.
No Active Standards
These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.
C57.12.44-2000
IEEE Standard Requirements for Secondary Network Protectors
Superseded by IEEE Std C57.12.44-2005. The performance, electrical and mechanical interchangeability, and the safety of the equipment are covered. The proper selection of such equipment is established as a basis for use in this standard. Certain electrical, dimensional, and mechanical characteristics are described; and certain safety features of three-phase, 60 Hz, low-voltage (600 V and below) network protectors are taken into consideration. This equipment is used for automatically connecting and disconnecting a network transformer from a secondary spot or grid network.
C57.12.44-2005
IEEE Standard Requirements for Secondary Network Protectors
Revision of IEEE Std C57.12.44-2000. The performance, electrical and mechanical interchangeability, and the safety of the equipment are covered. The proper selection of such equipment is established as a basis for use in this standard. Certain electrical, dimensional, and mechanical characteristics are described; and certain safety features of three-phase, 60 Hz, low-voltage (600 V and below) network protectors are taken into consideration. This equipment is used for automatically connecting and disconnecting a network transformer from a secondary spot or grid network.
These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.
No Inactive-Withdrawn Standards
These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.
No Inactive-Reserved Standards