Recommendations believed essential for the application of overcurrent protective devices that limit the exposure time of dry-type transformers to short-circuit currents are set forth in this guide. This guide is not intended to imply overload capability.
- Standard Committee
- PE/TR - Transformers
- Status
- Active Standard
- PAR Approval
- 2014-12-10
- Superseding
- C57.12.59-2001
- Board Approval
- 2015-09-03
- History
-
- ANSI Approved:
- 2016-11-30
- Published:
- 2015-11-06
Working Group Details
- Society
- IEEE Power and Energy Society
- Standard Committee
- PE/TR - Transformers
- Working Group
-
DryType-WGC57.12.59 - Dry Type Transformers - Dry Type Through Fault Current Duration Working Group
Learn More About DryType-WGC57.12.59 - Dry Type Transformers - Dry Type Through Fault Current Duration Working Group - IEEE Program Manager
- Patrycja Jarosz
Contact Patrycja Jarosz - Working Group Chair
- Derek Foster
Other Activities From This Working Group
Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.
PC57.12.59
Guide for Dry-Type Transformer Through-Fault Current Duration
This guide for dry-type transformer through-fault current duration applies to dry-type distribution and power transformers built in accordance with C57.12.01 and referenced as Categories I, II and III.
Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.
No Active Standards
These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.
C57.12.59-2001
IEEE Guide for Dry-Type Transformer Through-Fault Current Duration
This guide sets forth recommendations believed essential for the application of overcurrent protective devices that limit the exposure time of dry-type transformers to short-circuit currents. This guide is not intended to imply overload capability.
These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.
No Inactive-Withdrawn Standards
These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.
No Inactive-Reserved Standards