A uniform method is established for determining the temperature classification for the insulation systems for open-wound, solid-cast and resin-encapsulated power and distribution transformers by testing rather than by chemical composition. These insulation systems are intended for use in transformers covered by IEEE Std C57.12.01(TM) and IEEE Std C57.12.91(TM) as they apply to dry-type transformers whose highest voltages exceed nominal 600 V.
- Standard Committee
- PE/TR - Transformers
- Status
- Superseded Standard
- PAR Approval
- 2007-12-05
- Superseded by
- C57.12.60-2020
- Superseding
- C57.12.60-1998
- Corrigendum
-
C57.12.60-2009/Cor 1-2013
- Board Approval
- 2009-11-09
- History
-
- ANSI Approved:
- 2011-03-04
- Published:
- 2010-03-12
Working Group Details
- Society
- IEEE Power and Energy Society
- Standard Committee
- PE/TR - Transformers
- Working Group
-
DryType-WGC57.12.60 - Dry Type Transformers - Thermal Eval. For Solid-Cast & Resin Encap Insulation Working Group
Learn More About DryType-WGC57.12.60 - Dry Type Transformers - Thermal Eval. For Solid-Cast & Resin Encap Insulation Working Group - IEEE Program Manager
- Patrycja Jarosz
Contact Patrycja Jarosz - Working Group Chair
- Roger Wicks
Other Activities From This Working Group
Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.
No Active Projects
Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.
C57.12.60-2020
IEEE Standard for Thermal Evaluation of Insulation Systems for Dry-Type Power and Distribution Transformers
A uniform method is established for determining the temperature classification for the insulation systems for dry-type power and distribution transformers by testing rather than by chemical composition. These insulation systems are intended for use in transformers covered by IEEE Std C57.12.01(TM) and IEEE Std C57.12.91(TM) as they apply to dry-type transformers whose highest voltages exceed nominal 600 V.
These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.
C57.12.60-2009/Cor 1-2013
IEEE Standard Test Procedure for Thermal Evaluation of Insulation Systems for Dry-Type Power and Distribution Transformers, Including Open-Wound, Solid-Cast, and Resin-Encapsulated Transformers
This corrigendum clarifies temperature control for aging experiments in 4.5.1 that was a result of the combination of the two previous test standards. This corrigendum selects the method from the two which should have been used in the combined test standard represented by the 2009 version. This document also makes one minor editorial change in 4.4.
These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.
No Inactive-Withdrawn Standards
These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.
No Inactive-Reserved Standards