General recommendations for loading 65 degrees Centigrade-rise mineral-oil-immersed overhead and pad-mounted distribution transformers are covered. Recommendations for 55 degrees Centigrade-rise transformers are included because a substantial percentage of these transformers are still in service. The recommendations are based on winding hottest-spot calculations only. Other factors that may limit the permissible load to lower values are listed. A method to establish winding temperature and loss of life by nomographs is given.
- Standard Committee
- PE/TR - Transformers
- Status
- Superseded Standard
- Superseded by
- C57.91-1995
- Board Approval
- 1979-03-15
- History
-
- ANSI Approved:
- 1992-01-13
- Published:
- 1981-07-31
- Reaffirmed:
- 1991-03-21
Working Group Details
- Society
- IEEE Power and Energy Society
- Standard Committee
- PE/TR - Transformers
- Working Group
-
InsLife-WGC57.91 - Insulation Life - Loading Guide Working Group
Learn More About InsLife-WGC57.91 - Insulation Life - Loading Guide Working Group - IEEE Program Manager
- Malia Zaman
Contact Malia Zaman - Working Group Chair
- David Wallach
Other Activities From This Working Group
Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.
PC57.91
Guide for Loading Mineral-Oil-Immersed Transformers and Step-Voltage Regulators
This guide provides recommendations for loading mineral-oil-immersed transformers and step-voltage regulators with insulation systems rated for a 65 u00b0C average winding temperature rise at rated load. This guide applies to transformers manufactured in accordance with IEEE Std C57.12.00 and tested in accordance with IEEE Std C57.12.90, and step-voltage regulators manufactured and tested in accordance with IEEE Std C57.15. Because a substantial population of transformers and step-voltage regulators with insulation systems rated for 55 u00b0C average winding temperature rise at rated load are still in service, recommendations that are specific to this equipment are also included.
Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.
No Active Standards
These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.
C57.91-1995
IEEE Guide for Loading Mineral-Oil-Immersed Transformers
General recommendations for loading 65 C rise mineral-oil-immersed distribution and power transformers are covered.
C57.91-1995/Cor 1-2002
IEEE Guide for Loading Mineral-Oil-Immersed Transformers - Corrigendum 1
Errors identified in IEEE Std C57.91-1995 are addressed in this corrigendum.
These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.
No Inactive-Withdrawn Standards
These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.
C57.91-2011
IEEE Guide for Loading Mineral-Oil-Immersed Transformers and Step-Voltage Regulators
This guide provides recommendations for loading mineral-oil-immersed transformers and step-voltage regulators with insulation systems rated for a 65 u00b0C average winding temperature rise at rated load. This guide applies to transformers manufactured in accordance with IEEE Std C57.12.001 and tested in accordance with IEEE Std C57.12.90, and step-voltage regulators manufactured and tested in accordance with IEEE Std C57.15. Because a substantial population of transformers and step-voltage regulators with insulation systems rated for 55 u00b0C average winding temperature rise at rated load are still in service, recommendations that are specific to this equipment are also included.