Metal-oxide surge arresters designed to repeatedly limit the voltage surges on 48-Hz to 62-Hz power circuits by passing surge discharge current and automatically limiting the flow of system power current,are discussed. This standard applies to devices for separate mounting and to those supplied integrally with other equipment.
- Standard Committee
- PE/SPDC - Surge Protective Devices Committee
- Status
- Superseded Standard
- Superseded by
- C62.11-1999
- Superseding
- C62.11-1987
- Board Approval
- 1993-09-15
- History
-
- ANSI Approved:
- 1994-02-14
- Published:
- 1994-05-13
Working Group Details
- Society
- IEEE Power and Energy Society
- Standard Committee
- PE/SPDC - Surge Protective Devices Committee
- Working Group
-
HV3.3.11 - 3.3.11 Continuous Revision of C62.11 Standard WG
Learn More About HV3.3.11 - 3.3.11 Continuous Revision of C62.11 Standard WG - IEEE Program Manager
- Christian Orlando
Contact Christian Orlando - Working Group Chair
- Timothy Smith
Other Activities From This Working Group
Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.
P2770
60099-11 Surge Arresters - Part 11: Metal-Oxide Line Surge Arresters to Protect Power Line Insulation
This standard defines the design/type tests, routine test, acceptance tests and classifications for line surge arresters (LSA). The arresters covered by this standard are Non-Gapped Line Arresters (NGLA) and Externally Gapped Line Arresters (EGLA) for use on AC or DC transmission and distribution power lines with system voltages > 1kV.
PC62.11
Standard for Metal-Oxide Surge Arresters for AC Power Circuits (>1 kV)
This standard applies to metal-oxide surge arresters (MOSAs) designed to repeatedly limit the voltage surges on 48 Hz to 62 Hz power circuits (>1000 V) by passing surge discharge current and automatically limiting the flow of system power current. This standard applies to devices for separate mounting and to devices supplied integrally with other equipment.
Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.
C62.11-2020
IEEE Standard for Metal-Oxide Surge Arresters for AC Power Circuits (>1 kV)
Metal-oxide surge arresters (MOSAs) designed to repeatedly limit the voltage surges on 48 Hz to 62 Hz power circuits (>1000 V) by passing surge discharge current and automatically limiting the flow of system power current are addressed in this standard. This standard applies to devices for separate mounting and to devices supplied integrally with other equipment. The tests demonstrate that an arrester is able to survive the rigors of reasonable environmental conditions and system phenomena while protecting equipment and/or the system from damaging overvoltages caused by lightning, switching, and other undesirable surges.
These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.
C62.11-1987
IEEE Standard for Metal-Oxide Surge Arresters for AC Power Circuits
Metal-oxide surge arresters designed to repeatedly limit the voltage surges on 48 Hz to 62 Hz power circuits by passing surge discharge current and automatically limiting the flow of system power current are discussed. This standard applies to devices for separate mounting and to those supplied integrally with other equipment.
C62.11-1999
IEEE Standard for Metal-Oxide Surge Arresters for Alternating Current Power Circuits (>1KV)
Superseded by IEEE Std C62.11-2005. Metal-oxide surge arresters designed to repeatedly limit the voltage surges on 48-62 Hz power circuits (>1 kV) are covered in this standard. These devices operate by discharging surge current. Devices for separate mounting and those supplied integrally with other equipment are also discussed.
C62.11-2005
IEEE Standard for Metal-Oxide Surge Arresters for AC Power Circuits (> 1 kV)
This standard applies to metal-oxide surge arresters (MOSAs) designed to repeatedly limit the voltage surges on 48 Hz to 62 Hz power circuits (>1000 V) by passing surge discharge current and automatically limiting the flow of system power current. This standard applies to devices for separate mounting and to devices supplied integrally with other equipment. The tests demonstrate that an arrester can survive the rigors of reasonable environmental conditions and system phenomena while protecting equipment and/or the system from damaging overvoltages caused by lightning, switching, and other undesirable surges.
C62.11-2012
IEEE Standard for Metal-Oxide Surge Arresters for AC Power Circuits (>1 kV)
Metal-oxide surge arresters (MOSAs) designed to repeatedly limit the voltage surges on 48 Hz to 62 Hz power circuits (> 1000 V) by passing surge discharge current and automatically limiting the flow of system power current are addressed in this standard. This standard applies to devices for separate mounting and to devices supplied integrally with other equipment. The tests demonstrate that an arrester is able to survive the rigors of reasonable environmental conditions and system phenomena while protecting equipment and/or the system from damaging overvoltages caused by lightning, switching, and other undesirable surges.
C62.11a-2008
IEEE Standard for Metal-Oxide Surge Arresters for AC Power Circuits (>1 kV) Amendment 1: Short-Circuit Tests for Station, Intermediate, and Distribution Arresters
Metal-oxide surge arresters designed to repeatedly limit the voltage surges on 48 Hz to 62 Hz power circuits (>1000 V) by passing surge discharge current and automatically limiting the flow of system power current applies to this amendment. This amendment covers devices for separate mounting and to those supplied integrally with other equipment. The tests demonstrate that an arrester can survive the rigors of reasonable environmental conditions and system phenomena, while, at the same time, protect equipment and/or the system from damaging overvoltages caused by lightning, switching, or other undesirable surges.
These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.
No Inactive-Withdrawn Standards
These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.
No Inactive-Reserved Standards