Guidance is provided to specifiers, users and manufacturers of surge-protective devices (SPDs) about the application considerations of SPDs to power distribution systems and associated equipment. This guide applies to SPDs to be connected to the load side of the service equipment (and main over current protective device) of 50 Hz or 60 Hz ac power circuits rated 1000 V ac or less. Information on surge origins, effects of surges, number and magnitude of surge events, location categories, power distribution system (PDS) configurations, grounding and bonding, SPD specifications, SPD ratings, SPD characteristics, SPD lifetime, interactions of SPDs with a PDS, and SPD coordination considerations are provided in the guide.
- Standard Committee
- PE/SPDLV - Surge Protective Devices/Low Voltage
- Status
- Active Standard
- PAR Approval
- 2009-05-11
- Superseding
- C62.72-2007
- Board Approval
- 2016-03-03
- History
-
- ANSI Approved:
- 2017-07-28
- Published:
- 2016-06-10
Working Group Details
- Society
- IEEE Power and Energy Society
- Standard Committee
- PE/SPDLV - Surge Protective Devices/Low Voltage
- Working Group
-
LV3.6.6 - 3.6.6 LV AC Power Circuit Protective Devices WG
Learn More About LV3.6.6 - 3.6.6 LV AC Power Circuit Protective Devices WG - IEEE Program Manager
- Christian Orlando
Contact Christian Orlando - Working Group Chair
- Ronald Hotchkiss
Other Activities From This Working Group
Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.
No Active Projects
Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.
C62.62-2018
IEEE Standard Test Specifications for Surge-Protective Devices (SPDs) for Use on the Load Side of the Service Equipment in Low-Voltage (1000 V and Less) AC Power Circuits
Surge-protective devices (SPDs) intended to be installed on the load side of the service equipment connected to 50 Hz or 60 Hz ac power circuits rated at 1000 V (root mean squared [rms]) or less are the focus of this standard. Performance characteristics and standard methods for testing and rating are established for these devices, which may be composed of any combination of components. The tests in this standard are aimed at providing comparisons among the variety of SPDs available
C62.72a-2020
IEEE Guide for the Application of Surge-Protective Devices for Use on the Load Side of Service Equipment in Low-Voltage (1000 V or Less, 50 Hz or 60 Hz) AC Power Circuits--Amendment 1: SPD Disconnector Application Considerations and Coordination
The application considerations for surge-protective device disconnectors and the coordination of these devices in low-voltage ac power circuits are defined in this amendment. Application consideration details, potential issues, and recommendations are provided.
These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.
C62.62-2000
IEEE Standard Test Specifications for Surge Protective Devices for Low Voltage AC Power Circuits
This standard establishes methods for testing and measuring the performance characteristics for surge-protective devices used in low-voltage ac power circuits. Definitions are stated that apply specifically to surge-protective devices. The testing requirements are categorized into two groups, in which a minimum set of basic tests (BTs) are prescribed for all surge-protective devices within the scope of its documents, supplemented by additional tests (ATs) that might be needed to establish particular application requirements.
C62.62-2010
IEEE Standard Test Specifications for Surge-Protective Devices (SPDs) for Use on the Load Side of the Service Equipment in Low Voltage (1000 V and less) AC Power Circuits
Surge-protective devices (SPDs) intended to be installed on the load side of the service equipment connected to 50 Hz or 60 Hz AC power circuits rated at 1000 V (root mean squared [rms]) or less are the focus of this standard. Performance characteristics and standard methods for testing and rating are established for these devices, which may be composed of any combination of components. The tests in this standard are aimed at providing comparisons among the variety of SPDs available.
C62.72-2007
IEEE Guide for the Application of Surge Protective Devices for Low Voltage (1000 Volts or Less) AC Power Circuits
Information is provided to specifiers and users of surge-protective devices (SPDs) about the application considerations of SPDs associated with power distribution systems within North America. This guide applies to SPDs to be connected to the load side of the service entrance main over current protective device of 50 Hz or 60 Hz ac power circuits rated at 100 - 1000 V rms. The effects and side effects on the presence and operation of SPDs in low-voltage power distribution systems are described. The coordination of multiple SPDs on the same circuit is described.
These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.
No Inactive-Withdrawn Standards
These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.
No Inactive-Reserved Standards