This guide provides test and verification procedures for inverter-based resources interconnecting with transmission electric power systems. This guide specifies the test equipment, test conditions and test and verification methods for type tests, production tests, facility design and as-built evaluations and commissioning tests to be performed to demonstrate the interconnection capabilities and functions for equipment connected with transmission electric power systems. Included in the test and verification procedures are all performance and functional requirements for reliable integration of inverter-based resources into the power grid, including, but not limited to, voltage and frequency ride-through performance, reactive power control, power quality, and dynamic voltage support under abnormal voltage conditions. This guide may also specify verification procedures for generic steady-state short-circuit models for fault analysis, as well as, generic, fundamental frequency, stability-type models (root-mean-square, rms with positive-sequence and possibly negative-sequence representation) of inverter-based resources interconnecting with transmission electric power systems for bulk system stability studies and/or proprietary time-domain (electromagnetic transient, emt) models for verification of interconnection requirements of composite systems (facilities) at the point of interconnection..
- Standard Committee
- PE/EDPG - Energy Development & Power Generation
- Joint Sponsors
-
PE/EM
- Status
- Active PAR
- PAR Approval
- 2018-09-27
Working Group Details
- Society
- IEEE Power and Energy Society
- Standard Committee
- PE/EDPG - Energy Development & Power Generation
- Working Group
-
WSPPID/WSPI/WSPI-TV - Wind and Solar Plant Interconnection Test and Verification Working Group (WSPI-TV)
Learn More About WSPPID/WSPI/WSPI-TV - Wind and Solar Plant Interconnection Test and Verification Working Group (WSPI-TV) - IEEE Program Manager
- Vanessa Lalitte
Contact Vanessa Lalitte - Working Group Chair
- LIANG GUO
Other Activities From This Working Group
Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.
No Active Projects
Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.
No Active Standards
These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.
No Superseded Standards
These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.
No Inactive-Withdrawn Standards
These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.
No Inactive-Reserved Standards