This guide specifies the test requirements of system commissioning which are applicable to the DC (direct current) distribution network of the voltage level from 750 V to ±50 kV. The guide mainly includes the following aspects: the converter (AC (alternating current)/DC, DC/DC) test; the DC circuit breaker test; the test of active and passive network conversion; the test of the operation characteristics of low voltage DC islanded operation system; the test of feeder power balance system; the coordinated operation test of medium and low voltage DC system; the plug and play system test; the small power system test; the large power system test; the rated load test; the overload test; the short circuit test; and the trial operation.
- Standard Committee
- PE/T&D - Transmission and Distribution
- Status
- Active PAR
- PAR Approval
- 2020-12-03
Working Group Details
- Society
- IEEE Power and Energy Society
- Standard Committee
- PE/T&D - Transmission and Distribution
- Working Group
-
System Commissioning WG - System Commissioning of Medium and Low Voltage Direct Current Distribution Network
Learn More About System Commissioning WG - System Commissioning of Medium and Low Voltage Direct Current Distribution Network - IEEE Program Manager
- Michael Kipness
Contact Michael Kipness - Working Group Chair
- Peng Qiu
Other Activities From This Working Group
Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.
No Active Projects
Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.
No Active Standards
These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.
No Superseded Standards
These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.
No Inactive-Withdrawn Standards
These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.
No Inactive-Reserved Standards