This guide provides mathematical models for designers and facility operators to apply in determining the arc-flash hazard distance and the incident energy to which workers could be exposed during their work on or near electrical equipment.
- Standard Committee
- IAS/PCI - Petroleum and Chemical Industry
- Status
- Active Standard
- PAR Approval
- 2013-12-11
- Superseding
- 1584-2002
- Board Approval
- 2018-09-27
- History
-
- Published:
- 2018-11-30
Additional Resources
- Erratas
- 1584-2018_errata.pdf
- Downloads
- arc-flash-ie-and-iarc-calculators
Working Group Details
- Society
- IEEE Industry Applications Society
- Standard Committee
- IAS/PCI - Petroleum and Chemical Industry
- Working Group
-
1584_WG - Arc Flash Hazard Calculations Working Group
Learn More About 1584_WG - Arc Flash Hazard Calculations Working Group - IEEE Program Manager
- Patricia Roder
Contact Patricia Roder - Working Group Chair
- Daleep Mohla
Other Activities From This Working Group
Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.
P1584.2
Guide and Checklists for the Data Collection for Performing an Arc-Flash Hazard Calculation Study in Accordance with IEEE Std. 1584™ and IEEE Std.1584.1™ for Systems Operating at Three-Phase 50/60 Hz Alternating Current (AC) 1000 V and below
This standard provides guidance and checklists for the collection of required data for performing an arc-flash hazard calculation study in accordance with the process defined in IEEE 1584™-2018 and IEEE 1584.1™-2022 for systems operating at three-phase 50/60 Hz alternating current (AC) 1000 V and below.nThis standard does not include collection of data required for performing other system studies, such as a short-circuit study and overcurrent protective device coordination study. Results from these system studies are required to conduct an arc-flash hazard calculation study.
Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.
1584.1-2022
IEEE Guide for the Specification of Scope and Deliverable Requirements for an Arc-Flash Hazard Calculation Study in Accordance with IEEE Std 1584
Guidance for the specification and performance of an arc-flash hazard calculation study, in accordance with the process defined in IEEE Std 1584, is provided in this document. The minimum recommended requirements to enable the owner to specify an arc-flash hazard calculation study, including scope of work and associated deliverables, is outlined.
These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.
1584-2002
IEEE Guide for Performing Arc Flash Hazard Calculations
This guide provides techniques for designers and facility operators to apply in determining the arc flash hazard distance and the incident energy to which employees could be exposed during their work on or near electrical equipment. Included are 2 Arc Flash Hazard Calculators and 3 Test Data files. Contact [email protected] for these additional files. An interpretation is available at http://standards-qa21.ieee.org/reading/ieee/interp/1584-2002.html
1584.1-2013
IEEE Guide for the Specification of Scope and Deliverable Requirements for an Arc-Flash Hazard Calculation Study in Accordance with IEEE Std 1584(TM)
Guidance for the specification and performance of an arc-flash hazard calculation study, in accordance with the process defined in IEEE Std 1584(TM), is provided in this document. It outlines the minimum recommended requirements to enable the owner or its representative to specify an arc-flash hazard study, including scope of work and associated deliverables.
1584a-2004
IEEE Guide for Performing Arc-Flash Hazard Calculations--Amendment 1
Amendment to 1584-2002 This amendment provides additions and corrections to IEEE Std 1584-2002.
1584b-2011
IEEE Guide for Performing Arc-Flash Hazard Calculations--Amendment 2: Changes to Clause 4
Techniques for designers and facility operators to apply in determining the arc-flash hazard distance and the incident energy to which employees could be exposed during their work on or near electrical equipment are provided in IEEE Std 1584-2002 and IEEE Std 1584a-2004. Changes in Clause 4 (the analysis process), based on the experience of persons who have conducted many of these studies, are provided in this amendment.
These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.
No Inactive-Withdrawn Standards
These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.
No Inactive-Reserved Standards