This standard applies to alternating current (ac) switchgear, designed for both indoor and outdoor installation and for operation at service frequencies up to and including 60 Hz on systems having voltages above 1000 V. This standard is applied in relevant equipment standards by a normative reference to this standard, IEEE Std C37.100.1, on a section or clause-by-clause basis. Annex A of this standard provides recommendations for its application. The inclusion of this standard as a normative reference shall not imply that all of the requirements contained herein apply as a default. In the absence of a normative reference, this standard shall be considered informative only. In case of a conflict in requirements, the requirements of the relevant equipment standard shall prevail.
- Standard Committee
- PE/SWG - Switchgear
- Status
- Active Standard
- PAR Approval
- 2018-09-27
- Superseding
- C37.100.1-2007
- Board Approval
- 2018-12-05
- History
-
- Published:
- 2019-02-08
Additional Resources
- Erratas
- C37.100.1-2018_errata.pdf
Working Group Details
- Society
- IEEE Power and Energy Society
- Standard Committee
- PE/SWG - Switchgear
- Working Group
-
Adscom-WG_C37.100.1 - Adscom - IEEE Standard of Common Requirements for High Voltage Power Switchgear Rated Above 1000 V
Learn More About Adscom-WG_C37.100.1 - Adscom - IEEE Standard of Common Requirements for High Voltage Power Switchgear Rated Above 1000 V - Working Group Chair
- John Webb
Other Activities From This Working Group
Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.
PC37.100.1
Standard of Common Requirements for High Voltage Power Switchgear Rated Above 1000 V
This standard applies to alternating current (ac) switchgear, designed for both indoor and outdoor installation and for operation at service frequencies up to and including 60 Hz on systems having voltages above 1000 V. This standard is applied in relevant equipment standards by a normative reference to this standard, IEEE Std C37.100.1, on a section or clause-by-clause basis. Annex A of this standard provides recommendations for its application. The inclusion of this standard as a normative reference shall not imply that all of the requirements contained herein apply as a default. In the absence of a normative reference, this standard shall be considered informative only. In case of a conflict in requirements, the requirements of the relevant equipment standard shall prevail.
Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.
No Active Standards
These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.
C37.100.1-2007
IEEE Standard of Common Requirements for High Voltage Power Switchgear Rated Above 1000 V
This Standard collects the common requirements that are in many IEEE Power Switchgear Standards. These include: Service Conditions, Design (type) Tests, Design and Construction, Production (routine) Tests and Ratings. This standard applies to alternating current switchgear, designed for both indoor and outdoor installation and for operation at service frequencies up to and including 60 Hz on systems having voltages above 1000 V.
These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.
No Inactive-Withdrawn Standards
These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.
No Inactive-Reserved Standards