IEEE SA Standards Board Approvals
30 January/13 February 2020
New PARs
- P2857 (BOG/CAG)
Standard for Wireless Smart Utility Network Field Area Network (FAN) - P802.1AEdk (C/LM)
Standard for Local and metropolitan area networks-Media Access Control (MAC) Security Amendment 4: MAC Privacy protection - P802.3cw (C/LM)
Standard for Ethernet Amendment: Physical Layers and Management Parameters for 400 Gb/s Operation over DWDM (dense wavelength division multiplexing) systems - P802.3cx (C/LM)
Standard for Ethernet Amendment: Media Access Control (MAC) service interface and management parameters to support improved Precision Time Protocol (PTP) timestamping accuracy - P802.16t (C/LM)
Standard for Air Interface for Broadband Wireless Access Systems
Amendment – Fixed and Mobile Wireless Access in Narrowband Channels - P802f (C/LM)
Standard for Local and Metropolitan Area Networks: Overview and Architecture
Amendment: YANG Data Model for EtherTypes - P24641 (C/S2ESC)
Methods and Tools for Model-based Systems and Software Engineering - P2807.2 (C/SAB)
Guide for Application of Knowledge Graphs for Financial Services - P2858 (C/SAB)
Standard for Mini-program Architecture and Technical Requirements - P2863 (C/SAB)
Recommended Practice for Organizational Governance of Artificial Intelligence - P2145 (CES/BSC)
Standard Framework and Definitions for Blockchain Governance - P2146.1 (CES/BSC)
Standard for Entity-Based Risk Mutual Assistance Model through Blockchain Technology - P2146.2 (CES/BSC)
Standard for External Data Retrieval of Blockchain for Risk Mutual Assistance Model - P2040 (CES/SC)
Standard for General Requirements for Fully Automated Vehicles Driving on Public Roads - P2040.1 (CES/SC)
Taxonomy and Definitions for Connected and Automated Vehicles - P2040.2 (CES/SC)
Recommended Practice for Multi-Input Based Decision Making of Automated Vehicles Driving on Public Roads - P2040.3 (CES/SC)
Recommended Practice for Permitting Automated Vehicles to Drive on Public Roads - P2859 (CES/SC)
Standard for Biometric Multi-modal Fusion - P2861 (CES/SC)
Standard for Mobile Gaming Performance Evaluation and Optimization - P2862 (DEI/SC)
Recommended Practice for Partial Discharge Measurements under AC Voltage with VHF/UHF Sensors during Routine Tests on Factory and Pre-molded Joints of HVDC Extruded Cable Systems up to 800 kV - P4005 (GRSS/SC)
Standard Protocol and Scheme for Measuring Soil Spectroscopy - P1719 (PE/EM)
Guide for Evaluating Stator Cores of AC Electric Machines Rated 1 MVA and Higher - PC62.38 (PE/SPDLV)
Test Methods and preferred values for hybrid integrated circuit components containing gas discharge tube and metal oxide varistor technologies - PC37.04-2018/Cor 1 (PE/SWG)
Standard for Ratings and Requirements for AC High-Voltage Circuit Breakers with Rated Maximum Voltage Above 1000 V – Corrigendum 1 - PC37.09-2018/Cor 1 (PE/SWG)
Draft Standard Test Procedures for AC High-Voltage Circuit Breakers with Rated Maximum Voltage above 1000V – Corrigendum 1 - PC37.016-2018/Cor 1 (PE/SWG)
Standard for AC High Voltage Circuit Switchers Rated 15.5 kV through 245 kV – Corrigendum 1 - P2818 (RS/SC)
Reliability Component Stress Analysis and Derating Specification - P63184 (SASB/SCC39)
Assessment methods of the human exposure to electric and magnetic fields from wireless power transfer systems – models, instrumentation, measurement and numerical methods and procedures (Frequency range of 1 kHz to 30 MHz) - P2852 (SMC/SC)
Intelligent Assessment of Safety Risk for Overhead Transmission Lines Under Multiple Operating Conditions - P1609.13 (VT/ITS)
Wireless Access in Vehicular Environments – Reliable Data Transport Mechanisms for Multiple Receivers - P2853 (VT/RTSC)
Recommended Practice for Grounding of Traction Power Systems
PARs for the Revision of Standards
- P2416 (C/DA)
Standard for Power Modeling to Enable System-Level Analysis - P3333.1.1 (C/SAB)
Standard for Quality of Experience (QoE) and Visual-Comfort Assessments of Three-Dimensional (3D) Contents Based on Psychophysical Studies - P3333.1.2 (C/SAB)
Standard for the Perceptual Quality Assessment of Three Dimensional (3D), Ultra High Definition (UHD) and High Dynamic Range (HDR) Contents - P1450.6.2 (C/TT)
Standard for Memory Modeling in Core Test Language - P3007.2 (IAS/I&CPS)
Recommended Practice for the Maintenance of Industrial and Commercial Power Systems - P95 (PE/EM)
Recommended Practice for Insulation Testing of AC Electric Machinery With High Direct Voltage - P1215 (PE/IC)
Guide for the Application of Separable Insulated Connectors - P1267 (PE/SUB)
Guide for Development of Specifications for Turnkey Substation Projects - PC37.100.1 (PE/SWG)
Standard of Common Requirements for High Voltage Power Switchgear Rated Above 1000 V - P1413 (RS/SC)
Standard Framework for Reliability Prediction of Hardware
Modified PARs
- P802.1CS (C/LM)
Standard for Local and Metropolitan Area Networks — Link-local Registration Protocol - P802.3ct (C/LM)
Standard for Ethernet Amendment: Physical Layers and Management Parameters for 100 Gb/s Operation over DWDM (dense wavelength division multiplexing) systems - P24774 (C/S2ESC)
Systems and software engineering–Life cycle management–Specification for process description - P3002.9 (IAS/I&CPS)
Recommended Practice for Conducting Transient Stability Studies and Analysis of Industrial and Commercial Power Systems - P3003.5 (IAS/I&CPS)
Recommended Practice for Connections to Earth for Alternating Current (AC) Industrial and Commercial Power Systems Facilities - P303 (IAS/PCI)
Recommended Practice for Auxiliary Devices for Rotating Electrical Machines in Class I, Division 2 and Zone 2 Locations and Class II, Division 2 and Zone 22 Locations - P841 (IAS/PCI)
Standard for Petroleum and Chemical Industry–Premium-Efficiency, Severe-Duty, Totally Enclosed Squirrel Cage Induction Motors–0.75-370 kW (1-500 hp) - P1235 (PE/IC)
Guide for Properties of Stripes and Ridges for Identification of Underground Power Cable Jackets and Ducts - PC37.121 (PE/SWG)
Guide for Switchgear – Unit Substation – Requirements
Administratively Withdrawn PARs
- P2025.1 (CES/SC)
Standard for Consumer Drones: Taxonomy and Definitions - P2025.2 (CES/SC)
Standard for Consumer Drones: Privacy and Security - P3030 (CES/SC)
Standard for Consumer 3D Printing: Overview and Architecture
New Standards
- 2301 (C/CCSC)
IEEE Draft Guide for Cloud Portability and Interoperability Profiles (CPIP) - 802.3cm (C/LM)
IEEE Draft Standard for Ethernet Amendment Physical Layer and Management Parameters for 400 Gb/s over Multimode Fiber - 802.3cq (C/LM)
IEEE Draft Standard for Ethernet Amendment: Maintenance #13: Power over Ethernet over 2 pairs - 1589 (C/LT)
IEEE Draft Standard for an Augmented Reality Learning Experience Model - 1680.1a (C/SAB)
IEEE Draft Standard for Environmental and Social Responsibility Assessment of Computers and Displays Amendment 1 - 2791 (EMB/Stds Com)
IEEE Draft Standard for Bioinformatics Computations and Analyses Generated by High-Throughput Sequencing (HTS) to Facilitate Communication - 2778 (PE/EDPG)
IEEE Draft Guide for Solar Power Plant Grounding for Personnel Protection - C62.43.1 (PE/SPDLV)
IEEE Draft Guide for Surge Protectors and Surge Protective Circuits Used in Information and Communication Technology Circuits (ICT), Including Smart Grid – Part 1 Applications
Revision Standards
- 802.1AS (C/LM)
IEEE Draft Standard for Local and Metropolitan Area Networks – Timing and Synchronization for Time-Sensitive Applications - 802.1AX (C/LM)
IEEE Draft Standard for Local and Metropolitan Area Networks – Link Aggregation - 802.1X (C/LM)
IEEE Draft Standard for Local and Metropolitan Area Networks – Port-Based Network Access Control\ - 11073-10404 (EMB/11073)
IEEE Draft Standard – Health Informatics – Personal Health Device Communication — Part 10404: Device Specialization – Pulse Oximeter - 11073-10407 (EMB/11073)
IEEE Draft Standard – Health Informatics – Personal Health Device Communication — Device Specialization – Blood Pressure Monitor - 946 (PE/ESSB)
IEEE Draft Recommended Practice for the Design of DC Power Systems for Stationary Applications - 48 (PE/IC)
IEEE Draft Standard for Test Procedures and Requirements for Alternating-Current Cable Terminations Used on Shielded Cables Having Laminated Insulation Rated 2.5 kV through 765 kV or Extruded Insulation Rated 2.5 kV through 500 kV - 308 (PE/NPE)
IEEE Draft Standard Criteria for Class 1E Power Systems for Nuclear Power Generating Stations - 628 (PE/NPE)
IEEE Draft Standard Criteria for the Design, Installation, and Qualification of Raceway Systems for Class 1E Circuits for Nuclear Power Generating Stations - 1276 (PE/TR)
IEEE Draft Guide for the Application of High-Temperature Insulation Materials in Liquid-Immersed Distribution, Power and Regulating Transformers - C57.12.60 (PE/TR)
IEEE Draft Standard Test Procedure for Thermal Evaluation of Insulation Systems for Dry-Type Power and Distribution Transformers - 16 (VT/RTSC)
IEEE Draft Standard for Electrical and Electronic Control Apparatus on Rail Vehicles - 1653.2 (VT/RTSC)
IEEE Draft Standard for Uncontrolled Traction Power Rectifiers for Substation Applications Up to 1500 V DC Nominal Output