08 February 2019

IEEE SA Standards Board Approvals

8 February 2019

New PARs

  • P2804 (C/DA) Software-Hardware Interface for Multi-Many-Core
  • P802.1CMde (C/LM) Standard for Local and metropolitan area networks — Time-Sensitive Networking for Fronthaul Amendment: Enhancements to Fronthaul Profiles to Support New Fronthaul Interface, Synchronization, and Syntonization Standards
  • P802.1DF (C/LM) Time-Sensitive Networking Profile for Service Provider Networks
  • P802.1DG (C/LM) Time-Sensitive Networking Profile for Automotive In-Vehicle Ethernet Communications
  • P802.3ct (C/LM) Standard for Ethernet Amendment: Physical Layers and Management Parameters for 100 Gb/s and 400 Gb/s Operation over DWDM (dense wavelength division multiplexing) systems
  • P1939.1 (COM/AccessCore-SC) Standard for a Framework for Structuring Low Altitude Airspace for Unmanned Aerial Vehicle (UAV) Operations
  • P1938.1 (COM/NetSoft-SC) Standard for Software Defined Protocol and Functional Requirements for Improvement of the Signal-to-Noise Ratio (SNR) in Communications Channels
  • P4003 (GRSS/SC) Standard for Global Navigation Satellite System-Reflectometry (GNSS-R) Data and Metadata Content
  • P4004 (GRSS/SC) Standard for Calibration of Microwave Radiometers in the 300 MHz to 1 THz Frequency Range for Geoscience Applications
  • P2805.1 (IES/IES) Self-Management Protocols for Edge Computing Node
  • P2805.2 (IES/IES) Data acquisition, Filtering and buffering Protocols for Edge Computing Node
  • P2805.3 (IES/IES) Cloud-Edge Collaboration Protocols for Machine Learning
  • P48404.2 (PE/IC) Standard for Terminations and Joints for Extruded and Laminar Dielectric Shielded Cables Rated 69 kV through 500 kV
  • PC37.252 (PE/PSRCC) Guide for Testing Automatic Voltage Control Systems in Regional Power Grids
  • PC37.20.1a (PE/SWG) Standard for Metal-Enclosed Low-Voltage (1000 Vac and below, 3200 Vdc and below) Power Circuit Breaker Switchgear Amendment 1: Control and secondary circuits and devices, and all wiring
  • PC37.20.2a (PE/SWG) Standard for Metal-Clad Switchgear Amendment a: Control and secondary circuits and devices, and all wiring
  • PC37.21a (PE/SWG) Standard for Control Switchboards Amendment a: Control and secondary circuits and devices, and all wiring
  • PC37.100.6 (PE/SWG) Guide for Determination of Test Specimens for Seismic Qualification for Building Code Applications
  • P62209-3 (SASB/SCC39) Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices – Human models, instrumentation, and procedures – Part 3: Vector probe systems (Frequency range of 100 MHz to 6 GHz)

PARs for the Revision of Standards

  • P952 (AES/GA) Standard Specification Format Guide and Test Procedure for Single-Axis Interferometric Fiber Optic Gyros
  • P29119-1 (C/S2ESC) ISO/IEC/IEEE International Standard – Software and systems engineering –Software testing –Part 1:Concepts and definitions
  • P29119-2 (C/S2ESC) ISO/IEC/IEEE International Standard – Software and systems engineering –Software testing –Part 2:Test processes
  • P29119-3 (C/S2ESC) ISO/IEC/IEEE International Standard – Software and systems engineering — Software testing –Part 3: Test documentation
  • P29119-4 (C/S2ESC) ISO/IEC/IEEE International Standard – Software and systems engineering–Software testing–Part 4: Test techniques
  • P11073-10420 (EMB/11073) Health informatics — Personal health device communication Part 10420: Device specialization — Body composition analyzer
  • P11073-10421 (EMB/11073) Health informatics–Personal health device communication Part 10421: Device specialization–Peak expiratory flow monitor (peak flow)
  • P11073-10441 (EMB/11073) Health Informatics–Personal health device communication Part 10441: Device specialization–Cardiovascular fitness and activity monitor
  • P11073-10472 (EMB/11073) Health informatics–Personal health device communication–Part 10472: Device specialization–Medication monitor
  • P1428 (PE/IC) Guide for Installation Methods for Fiber Optic Cables in Power Generating Stations and in Industrial Facilities
  • P1717 (PE/IC) Standard for Testing Fire-Resistive, Circuit Integrity Cables and Cable Systems Using a Hydrocarbon Pool Fire Test Protocol
  • P1222 (PE/PSCC) Standard for Testing and Performance for All-Dielectric Self-Supporting (ADSS) Fiber Optic Cable for Use on Electric Utility Power Lines
  • PC62.31 (PE/SPDLV) Standard for Test Methods and Preferred Values for Low-Voltage Gas Discharge Tube Surge-Protective Components
  • PC37.11 (PE/SWG) Standard Requirements for Electrical Control for AC High-Voltage (>1000 V) Circuit Breakers
  • PC37.017 (PE/SWG) Standard for Bushings for High-Voltage [over 1000 V (ac)] Circuit Breakers and Gas-Insulated Switchgear
  • PC57.12.20 (PE/TR) Standard for Overhead-Type Distribution Transformers 500 kVA and Smaller; High Voltage, 34 500 V and Below; Low Voltage, 7970/13 800Y V and Below
  • PC57.12.24 (PE/TR) Standard for Submersible, Three-Phase Transformers, 3750 kVA and Smaller: High Voltage, 34 500 GrdY/19 920 Volts and Below; Low Voltage, 600 Volts and Below
  • PC57.12.30 (PE/TR) Standard for Pole-Mounted Equipment–Enclosure Integrity for Coastal Environments
  • PC57.12.31 (PE/TR) Standard for Pole-Mounted Equipment–Enclosure Integrity

Modified PARs

  • P802.3cn (C/LM) Standard for Ethernet Amendment: Physical Layers and Management Parameters for 50 Gb/s, 200 Gb/s, and 400 Gb/s Operation over Single-Mode Fiber
  • P2730 (EMB/Stds Com) Standard for Terms, Definitions, and Classification of Medical Electrical Equipment/Systems Employing Robotic Technology
  • P421.5 (PE/ED&PG) Recommended Practice for Excitation System Models for Power System Stability Studies
  • P2740 (PE/IC) Guide for the Selection and Installation of Electrical Cables and Systems in Hazardous (Classified) Locations on Oil & Gas Land Drilling Rigs
  • PC57.104 (PE/TR) Guide for the Interpretation of Gases Generated in Oil-Immersed Transformers

Withdrawn PARs

  • P2550 (EMB/Stds Com) Standard for Remote Monitoring of a Neonate and the Mother Post-Partum in a Non-Clinical Healthcare Setting
  • P2667 (EMC/SDCom) Recommended Practice for an Electromagnetic Immunity Site Survey
  • P844.5 (IAS/PCI) Recommended Practice for the Design, Installation, Testing, Commissioning and Maintenance of Induction Heating Systems for Pipelines, Vessels, Equipment, Structures and Induction Susceptor Heating Furnaces

New Standards

  • 802.15.10a (C/LM) IEEE Draft Recommended Practice for Routing Packets in IEEE 802.15.4 Dynamically Changing Wireless Networks Amendment to Fully Define use of Addressing and Route Information Currently in the Standard – Amendment A
  • 844.3 (IAS/PCI) IEEE Draft Standard for Impedance Heating of Pipelines and Equipment – General, Testing, Marking, and Documentation Requirements
  • 844.4 (IAS/PCI) IEEE Draft Standard for Impedance Heating of Pipelines and Equipment – Application Guide for Design, Installation, Testing, Commissioning and Maintenance

Revision Standards

  • 15026-1_Revision (C/S2ESC) ISO/IEC/IEEE Draft International Standard – Systems and Software Engineering – Systems and Software Assurance -Part 1: Concepts and Vocabulary
  • 1900.1 (COM/DySPAN-SC) IEEE Draft Standard Definitions and Concepts for Dynamic Spectrum Access: Terminology Relating to Emerging Wireless Networks, System Functionality, and Spectrum Management
  • 80005-1 (IAS/PCI) IEC/IEEE Draft International Standard – Utility Connections in Port – Part 1: High Voltage Shore Connection (HVSC) Systems – General requirements
  • 572 (PE/NPE) Standard for Qualification of Class 1E Connection Assemblies for Nuclear Power Generating Stations and Other Nuclear Facilities
  • 1267 (PE/SUB) IEEE Draft Guide for Development of Specification for Turnkey Substation Projects
  • C37.011 (PE/SWG) IEEE Draft Guide for the Application of Transient Recovery Voltage for AC High-Voltage Circuit Breakers with Rated Maximum Voltage above 1000V
  • 1159.3 (PE/T&D) IEEE Draft Recommended Practice for Power Quality Data Interchange Format (PQDIF)
  • C57.105 (PE/TR) IEEE Draft Guide for Application of Transformer Connections in Three-Phase Electrical Systems
  • 945 (SASB/SCC14) Recommended Practice for Preferred Metric Units for Use in Electrical and Electronics Science and Technology
  • C95.1 (SASB/SCC39) IEEE Draft Standard for Safety Levels with Respect to Human Exposure to Electric, Magnetic and Electromagnetic Fields, 0 Hz to 300 GHz
  • 1609.0 (VT/ITS) IEEE Draft Guide for Wireless Access in Vehicular Environments (WAVE) – Architecture

Subscribe to our Newsletter

Sign up for our monthly newsletter to learn about new developments, including resources, insights and more.