Standards Board Resolutions

The SASB recognized the Computer Society/Knowledge Engineering Standards Committee, to be abbreviated as C/KESC, as an official Standards Committee, in accordance with IEEE SASB Bylaws 5.2.2.

The SASB resolved that the Understanding IEEE SA’s Antitrust, Competition, and Commercial Terms Policies training shall be completed by Standards Committee/Working Group Officers within 90 days of appointment as such or by 31 December 2023, whichever is later.

The SASB recognized the Circuits and Systems Society/Domain-Specific Accelerators Standards Committee, to be abbreviated as CASS/DSA-SC, as an official Standards Committee, in accordance with IEEE SASB Bylaws 5.2.2.

The SASB recognized the Circuits and Systems Society/Emerging Processor Systems Standards Committee, to be abbreviated as CASS/EPS-SC, as an official Standards Committee, in accordance with IEEE SASB Bylaws 5.2.2.

The SASB recognized the Circuits and Systems Society/Flexible and Wearable Circuits and Systems Standards Committee, to be abbreviated as CASS/FW-SC, as an official Standards Committee, in accordance with IEEE SASB Bylaws 5.2.2.

The SASB recognized the Circuits and Systems Society/Integrated Circuit Design and Test for Emerging Circuits and Systems Standards Committee, to be abbreviated as CASS/IC-SC, as an official Standards Committee, in accordance with IEEE SASB Bylaws 5.2.2.

The SASB recognized the Magnetics Society/Magnetics Society Standards Committee, to be abbreviated as MS/MagSoc-SC, as an official Standards Committee, in accordance with IEEE SASB Bylaws 5.2.2.

The SASB recognized the Broadcast Technology Society/Broadcast Technology Standards Committee, to be abbreviated as BTS/BTSC, as an official Standards Committee, in accordance with IEEE SASB Bylaws 5.2.2.

The SASB recognized the Vehicular Technology Society/Mobile Radio Standards Committee, to be abbreviated as (VT/MRSC), as an official Standards Committee, in accordance with IEEE SASB Bylaws 5.2.2.

The SASB recognized the Communications Society/Unmanned Aerial Vehicles Communications Standards Committee, to be abbreviated as (COM/AerCom-SC), as an official Standards Committee, in accordance with IEEE SASB Bylaws 5.2.2.

The SASB recognized the Vehicular Technology Society/Overhead Contact Systems, to be abbreviated as (VT/OCS), as an official Standards Committee, in accordance with IEEE SASB Bylaws 5.2.2.

The SASB disbanded SCC22 – Power Quality.

The SASB moved that the following SCCs be transitioned into the Standards and Standards Innovations (S&SI) Strategic Management and Delivery Committee (SMDC) and that they shall be recognized by the SASB as Standards Committees:

• SCC04 – Electrical Insulation
• SCC14 – Quantities, Units, and Letter Symbols
• SCC20 – Test and Diagnosis for Electronic Systems
• SCC21 – Fuel Cells, Photovoltaics, Dispersed Generation, and Energy Storage
• SCC31 – Automatic Meter Reading and Energy Management
• SCC39 – International Committee on Electromagnetic Safety

The SASB moved that the newly recognized Standards Committees (that were the former SCCs) be permitted to operate under their current operating procedures until 31 December 2022 or until acceptance by AudCom/SASB of updated operating procedures on the Standards Committee baseline, whichever is sooner.

The SASB recognized the Signal Processing Society/Synthetic Aperture Standards Committee, to be abbreviated as (SPS/SASC), as an official Standards Committee, in accordance with IEEE SASB Bylaws 5.2.2.

The SASB recognized the Council on Electronic Design Automation/Standards Committee, to be abbreviated as (CEDA/SC), as an official Standards Committee, in accordance with IEEE SASB Bylaws 5.2.2.

The SASB recognized the Instrumentation and Measurement Society/TC45 – Radiation and Nuclear Instrumentation and Systems, to be abbreviated as (IM/RNIS), as an official Standards Committee, in accordance with IEEE SASB Bylaws 5.2.2.

The SASB recognized the Vehicular Technology Society/Communications Based Train Control and Signals Committee, to be abbreviated as (VT/CBTC&SIG), as an official Standards Committee, in accordance with IEEE SASB Bylaws 5.2.2.

The SASB recognized the Vehicular Technology Society/Traction Power Systems Standards Committee, to be abbreviated as (VT/TPSSC), as an official Standards Committee, in accordance with IEEE SASB Bylaws 5.2.2.

IEEE standards (including recommended practices and guides) shall be written in such a way as to unambiguously communicate the technical necessities, preferences, and options of the standard to best enable market adoption, conformity assessment, interoperability, and other technical aspirations of the developing standards committee. IEEE standards should be written in such a way as to avoid non-inclusive and insensitive terminology (see IEEE Policy 9.27) and other deprecated terminology (see clause 10 of the IEEE SA Style Manual) except when required by safety, legal, regulatory, and other similar considerations. Terms such as master/slave, blacklist, and whitelist should be avoided.

The SASB recognized the Board of Governors/Strategic and Emerging Standards Committee, to be abbreviated as (BOG/SESCOM), as an official Standards Committee, in accordance with IEEE SASB Bylaws 5.2.2.

The SASB recognized the Computer Society/Artificial Intelligence Standards Committee, to be abbreviated as (C/AISC), as an official Standards Committee, in accordance with IEEE SASB Bylaws 5.2.2.

The SASB recognized the Computer Society/Functional Safety Standards Committee, to be abbreviated as (C/FSSC), as an official Standards Committee, in accordance with IEEE SASB Bylaws 5.2.2.

The SASB recognized the Computer Society/Online Gaming Standards Committee, to be abbreviated as (C/OGSC), as an official Standards Committee, in accordance with IEEE SASB Bylaws 5.2.2.

The SASB recognized the Consumer Technology Society/Electronic Games and Sports Standards Committee, to be abbreviated as (CTS/EGSSC), as an official Standards Committee, in accordance with IEEE SASB Bylaws 5.2.2.

The SASB recognized the Industry Applications Society/Pulp and Paper Industry Committee, to be abbreviated as (IAS/PPIC), as an official Standards Committee, in accordance with IEEE SASB Bylaws 5.2.2.

In regards to the baseline P&P documents maintained by AudCom, the SASB declared that P&Ps submitted before 01 March 2021 may use either the 2017 or 2020 baseline documents, and all P&Ps submitted on or after 01 March 2021 shall use the 2020 baseline documents.

The SASB recognized the Vehicular Technology Society/High Speed Train and Maglev Standards Committee, to be abbreviated as VT/HSTMSC, as an official Standards Committee, in accordance with IEEE SASB Bylaws 5.2.2.

The SASB updated the Scope of the SASB Ad Hoc on Terminology:

1. Identify a process for the review of any/all terminology recommended or suggested for potential deprecation by the SASB,
2. Examine what other Standards Setting Organizations have done or are planning to do,
3. Ensure that those in the decision-making process have a fiduciary duty to IEEE,
4. Develop draft text that memorializes the process in the relevant SASB rules document (e.g., SASB OpMan).

Whereas the IEEE SA Board of Governors has terminated the IEEE SA External Representatives to NFPA as of 31 August 2020, and whereas the Scope of SCC18 will no longer be relevant at that time, the IEEE SA Standards Board hereby disbands SCC18 as of 31 August 2020.

The SASB recognized the Consumer Electronics Society/Digital Finance and Economy Standards Committee, to be abbreviated as CES/DFESC, as an official Standards Committee, in accordance with IEEE SASB Bylaws 5.2.2.

The SASB recognized the Industry Applications Society/Industrial Power Conversion Systems Department, to be abbreviated as IAS/IPCSD, as an official Standards Committee, in accordance with IEEE SASB Bylaws 5.2.2.

The SASB recognized the Industry Applications Society/Metal Industry Committee Standards Development Subcommittee, to be abbreviated as IAS/METC, as an official Standards Committee, in accordance with IEEE SASB Bylaws 5.2.2.

The SASB noted that it would take action to Inactivate the following Standards Committee (VT/RTSC) whose WG P&P was requested prior to 01 March 2019 if the Standards Committee has not submitted WG P&P by 29 February 2020.

The SASB directed SCC18 to operate under draft 9.7 of the SCC18 P&P. [NOTE: SCC18 may propose revisions to its P&P at any time for SASB consideration.]

The SASB recognized the Consumer Electronics Society/Smart Devices Standards Committee, to be abbreviated as CES/SDSC, as an official Standards Committee, in accordance with IEEE SASB Bylaws 5.2.2.

The SASB recognized the Vehicular Technology Society/Automated Vehicles Standards Committee, to be abbreviated as VT/AVSC, as an official Standards Committee, in accordance with IEEE SASB Bylaws 5.2.2.

The SASB recognized the Computer Society/Blockchain and Distributed Ledger Standards Committee, to be abbreviated as C/BDL, as an official Standards Committee, in accordance with IEEE SASB Bylaws 5.2.2.

The SASB recognized the Computer Society/Data Compression Standards Committee, to be abbreviated as C/DC, as an official Standards Committee, in accordance with IEEE SASB Bylaws 5.2.2.

The SASB recognized the Computer Society/Smart Manufacturing Standards Committee, to be abbreviated as C/SM, as an official Standards Committee, in accordance with IEEE SASB Bylaws 5.2.2.

The SASB disbanded the Standards Committees:

• Industry Applications Society/Energy Systems (IAS/ES),
• Industry Applications Society/Power Systems Engineering (IAS/PSE),
• Industry Applications Society/Power Systems Protection (IAS/PSP),
• Industry Applications Society/Technical Books Coordinating Committee (IAS/TBCC)

and will move the responsibilities for all associated PARs and standards to the Industry Applications Society/Industrial and Commercial Power Systems Standards Development Committee (IAS/I&CPS).

The SASB disbanded the Vehicular Technology Society/Land Transportation Standards Committee (VT/LT) and will move IEEE Std 1616 and IEEE Std 1616a to the Vehicular Technology Society/Intelligent Transportation Systems Standards Committee (VT/ITS).

The consent agenda for the IEEE SA Standards Board (SASB) November 2019 meeting will include for transfer to Inactive-Reserved status all standards with an expiration date of 31 December 2018 for which there is not an active revision project (i.e., an SASB approved PAR for revision).

The consent agenda for the IEEE SA Standards Board (SASB) March 2020 meeting will include for transfer to Inactive-Reserved status all standards with an expiration date of 31 December 2019 for which there is not an active revision project (i.e., an SASB approved PAR for revision).

Beginning in 2021, the consent agenda for the first IEEE SA Standards Board (SASB) meeting of the year will include for transfer to Inactive-Reserved status all standards with an expiration date on or before 31 December of the previous year. Consideration for inactivation of expired standards will occur regardless of the status of any active revision projects.

The SASB directed AudCom to allow the use of ‘Standards Committee’ terminology in P&P that are otherwise compliant with the 2017 baseline templates.

The SASB approved an implementation plan for development of open source software as a component of IEEE standards, and the SASB set Q1 2020 as a target for implementation.

The deadline for submitting items (ICAIDs, activity status reports, etc.) for an ICCom meeting shall be at least 14 days before that ICCom meeting. The ICCom submittal deadlines shall be added to the IEEE SA Governance calendar, along with the RevCom and NesCom submittal deadlines.

The SASB disbanded SCC42 and will move its three PARs to the IEEE Vehicular Technology Society.

The SASB recognized the Consumer Electronics Society/Virtual Reality and Augmented Reality Standards Committee, to be abbreviated as CES/VRARSC, as an official Sponsor, in accordance with IEEE SASB Bylaws 5.2.2.

The SASB approved a motion to suspend work from Standards Committees whose Sponsor P&P have expired on 31 December 2018, and whose revised P&Ps have not been received by AudCom by 28 February 2019.

The SASB approved a motion to suspend work from Standards Committees whose Sponsor P&P were accepted prior to 2018 and who have not submitted current Working Group P&P to AudCom by 28 February 2019.

The SASB recognized the Consumer Electronics Society/Blockchain Standards Committee, to be abbreviated as CES/BSC, as an official Sponsor, in accordance with IEEE SASB Bylaws 5.2.2.

The SASB approved updates to the LOA form and to section 6.3.4 in the SASB Operations Manual as described in 1218patagen_6-1-updated (PDF), with an implementation date of 1 June 2019.

The SASB:

• Directs the IEEE SA Representative to the TAB Committee on Standards to initiate discussions with that committee on the importance of clarity in new and existing Standards Association Standards Committee scope statements;
• Asks the TAB Committee on Standards to develop scope statement guidelines for Societies and Councils in collaboration with SASB; and
• Requests the IEEE SA Representative to the TAB Committee on Standards to report to the SASB on the progress in this regard.

The SASB approved Panama City, Panama as the venue for its June 2019 meeting series.

The SASB approved the following motion:
Move to approve the two 2019 Standards Board face-to-face meeting locations:
19-21 March — Munich, Germany
11-13 June — Panama or Costa Rica, final location decided at 27 September 2018 Standards Board telecon

The SASB recommends that SCC18 nominate external representatives to NFPA CMPs and TCs based on their qualifications irrespective of their employer affiliation. The SASB empowers staff to update the SCC18 web site accordingly.

When SCC18 is unable to reach a consensus position on any NFPA related ballot under consideration, the ER is directed to submit an Abstain ballot response with only the accompanying comment/explanation: “IEEE has not reached consensus on this item.”

The SASB encourages SCC42 to intensify its efforts and obtain substantive contributions from the transportation industry, with a report on results to date to the SASB in September 2018.

The SASB asks the SCC Coordinator to engage in discussions with SCC42 Transportation and with relevant IEEE Societies and other forums to discuss how IEEE can make progress in standards development for this important area and to report back at the December 2018 SASB meeting.

The SASB recognized the Communications Society/Green ICT Standards Committee, to be abbreviated as COM/GreenICT-SC, as an official Sponsor, in accordance with IEEE SASB Bylaws 5.2.2.

The SASB recognized the Geoscience and Remote Sensing Society/Standards Committee, to be abbreviated as GRSS/SC, as an official Sponsor, in accordance with IEEE SASB Bylaws 5.2.2.

The SASB recognized the Photonics Society/Standards Committee, to be abbreviated as PHO/SC, as an official Sponsor, in accordance with IEEE SASB Bylaws 5.2.2.

The SASB will continue to follow-up on the SASB Ratification of the Actions taken by the IEEE 802 LMSC Sponsor in Connection with the 802.11 TGax Complaint until the project completes Sponsor ballot.

PE/ED&PG shall submit a draft Sponsor P&P to AudCom by 31 March 2018 or the IEEE SA Standards Board shall suspend PE/ED&PG’s authorization to perform standards work (including but not limited to: PAR actions, Sponsor ballot actions, etc.).

PE/NPE shall submit a draft Sponsor P&P to AudCom by 31 March 2018 or the IEEE SA Standards Board shall suspend PE/NPE’s authorization to perform standards work (including but not limited to: PAR actions, Sponsor ballot actions, etc.).

PE/PSIM shall submit a draft Sponsor P&P to AudCom by 31 March 2018 or the IEEE SA Standards Board shall suspend PE/PSIM’s authorization to perform standards work (including but not limited to: PAR actions, Sponsor ballot actions, etc.).

PEL/SC shall submit a draft Sponsor P&P to AudCom by 31 March 2018 or the IEEE SA Standards Board shall suspend PEL/SC’s authorization to perform standards work (including but not limited to: PAR actions, Sponsor ballot actions, etc.).

The SASB recognized the Communications Society/Access and Core Networks Standards Committee, to be abbreviated as COM/AccessCore-SC, as an official Sponsor, in accordance with IEEE SASB Bylaws 5.2.2.

The SASB recognized the Communications Society/Edge, Fog, Cloud Communications with IOT and Big Data Standards Committee, to be abbreviated as COM/EdgeCloud-SC, as an official Sponsor, in accordance with IEEE SASB Bylaws 5.2.2.

The SASB recognized the Communications Society/Mobile Communication Networks Standards Committee, to be abbreviated as COM/MobiNet-SC, as an official Sponsor, in accordance with IEEE SASB Bylaws 5.2.2.

The SASB recognized the Society on Social Implications of Technology/Standards Committee, to be abbreviated as SSIT/SC, as an official Sponsor, in accordance with IEEE SASB Bylaws 5.2.2.

The SASB recognized Aerospace and Electronic Systems Society/Unmanned Aerial Systems and Unmanned Aerial Vehicles Standards Committee, to be abbreviated as AES/UAS/UAV/SC, as an official Sponsor, in accordance with IEEE SASB Bylaws 5.2.2.

The SASB recognized Communications Society/Virtualized and Software Defined Networks, and Services Standards Committee, to be abbreviated as COM/NetSoft-SC, as an official Sponsor, in accordance with IEEE SASB Bylaws 5.2.2.

The SASB recognized Power and Energy Society/Power Systems Communications & Cybersecurity, to be abbreviated as PE/PSCC, as an official Sponsor, in accordance with IEEE SASB Bylaws 5.2.2.

The SASB recognized Intelligent Transportation Systems Society/Standards Committee, to be abbreviated as ITSS/SC, as an official Sponsor, in accordance with IEEE SASB Bylaws 5.2.2.

The P1838/TTSC Oversight Committee was disbanded with thanks.

The SASB recognized Power and Energy Society/Energy Storage & Stationary Battery, to be abbreviated as PE/ESSB, as an official Sponsor, in accordance with IEEE SASB Bylaws 5.2.2.

The SASB disbanded Computer Society/Storage Systems (C/SS) and moved the Working Groups associated with C/SS to Computer Society/Microprocessor Standards Committee (C/MSC) [P1890 and P2200].

The SASB disbanded Computer Society/Foundation for Intelligent Physical Agents (C/FIPA) and moved to C/SAB Special Projects the PAR for the open project [P2409].

In regards to P802.11ax, the SASB concluded that the measures are effective, SASB oversight will continue, and notes that a ProCom Ad Hoc was formed to determine whether changes are needed in IEEE SA policies and procedures regarding dominance.

The SASB recognized the Power and Energy Society/Smart Buildings, Loads and Customer Systems Committee, to be abbreviated as PE/SBLC, as an official Sponsor, in accordance with IEEE SASB Bylaws 5.2.2.

The SASB ratified the actions taken 11 November 2016 by the IEEE 802 LMSC Sponsor in connection with the 802 TGax complaint.

The SASB recognized the Industry Applications Society/Electrical Safety Committee, to be abbreviated as IAS/ESafeC, as an official Sponsor, in accordance with IEEE SASB Bylaws 5.2.2.

The SASB recognized the Instrumentation and Measurement Society/Secure and Dependable Measurement, to be abbreviated as IM/SDM, as an official Sponsor, in accordance with IEEE SASB Bylaws 5.2.2.

NPS/NI&D shall submit a draft Sponsor P&P to AudCom by 21 February 2017 or the IEEE SA Standards Board shall suspend NPS/NI&D’s authorization to perform standards work (including but not limited to: PAR actions, Sponsor ballot actions, etc.).

VT/RTSC shall submit a draft Sponsor P&P to AudCom by 21 February 2017 or the IEEE SA Standards Board shall suspend VT/RTSC’s authorization to perform standards work (including but not limited to: PAR actions, Sponsor ballot actions, etc.).

In regards to PC37.238, the Standards Board directs the 1588 WG and PC37.238 WG to meet to develop a mutually acceptable solution no later than 10 February 2017. If no solution acceptable to both WGs can be developed, the Standards Board will vote to resolve the issue in the March 2017 meeting of the SASB in Shenzhen, China. This process will be mediated by the RevCom Chair.

The SASB approved the continuance of the P1838 OC into 2017.

The SASB expanded the scope of the P1838 OC to provide oversight of the Test Technology (C/TT) Sponsor and its subgroups.

The SASB officially recognized the Instrumentation and Measurement Society/Traffic Enforcement Technologies, to be abbreviated as IM/TET, as an official Sponsor.

The SASB approved the IEEE SA Standards Board Implementation Plan for IEEE Policy 9.17 (Updated 30 June 2016) (PDF)

The SASB disbanded SCC40.

The SASB directed staff to remove the words ‘(for the purposes of licensing information)’ from Section B of the LOA form.

P&Ps submitted for AudCom review on or after the 1st of March 2016 shall use the 2015 baselines. P&Ps submitted after the publication of the 2015 baselines and before the 1st of March 2016 can either use the 2013 or 2015 baselines.

The Board clarified the intent of the 3 September 2015 resolution with the following resolution:
RESOLVED, that the IEEE SA Standards Board hereby confirms that the sole LOA form that the Standards Board has approved does not permit an LOA with the D.1.d box selected to indicate the existence of alternative licensing assurances through contact information or otherwise, or to include attachments other than the extension page for identification of specific patents under Item E.1.

The SASB officially recognized the Sensors Council/Standards Committee, to be abbreviated as SEN/SC, as an official Sponsor.

The SASB officially recognized the Systems, Man, and Cybernetics Society/Standards Committee, to be abbreviated as SMC/SC, as an official Sponsor.

RESOLVED, that the IEEE SA Standards Board hereby confirms that the sole LOA form that the Standards Board has approved does not permit an LOA with the D.1.d box selected to include attachments other than the extension page for identification of specific patents under Item E.1.

Resolved that,

The IEEE 802 LAN/MAN Standards Committee (LMSC) has failed in its duty as a Sponsor to complete the 2014 LMSC annual financial report in a timely manner. Therefore, the following corrective actions are approved by the SASB:

1. IEEE SA staff is instructed to set up requested departments in NetSuite and to keep the NetSuite database unlocked until Wednesday, 17 June 2015.
2. The LMSC Chair and the LMSC Treasurer shall complete the 2014 LMSC annual financial report and certify that the reported financial data is materially correct on or before Wednesday, 17 June 2015. All audit material shall be made available to the auditors by 30 June 2015.
3. The LMSC Chair and the LMSC Treasurer are instructed to provide a plan to meet the schedule shown in item 4. This plan shall be submitted by 30 June 2015 and shall be acceptable to IEEE SA staff and IEEE SA Treasurer.
4. After completing the 2014 LMSC financial reporting as outlined in item 2 above, the 2015 LMSC financial data shall be entered in NetSuite with the following timeline:
   • For Q1 and Q2 2015, the financial data of LMSC shall be submitted through NetSuite by 31 July 2015 and 31 August 2015 respectively;
   • For Q3 2015, the financial data of LMSC shall be submitted through NetSuite by 15 November 2015;
   • For Q4 2015, the financial data of LMSC shall be submitted through NetSuite by 15 February 2016.
   • Complete certified 2015 financial data for LMSC shall be available in NetSuite no later than 15 February 2016.
5. If the SASB determines that the LMSC Chair and the LMSC Treasurer have failed to satisfactorily execute their duties for the 2014 and/or 2015 LMSC annual financial reporting per the schedule outlined above, the SASB reserves the right to pursue any and all additional actions that it deems necessary to bring the LMSC annual financial reporting into compliance with its operating procedures. Such actions may include removal of specific LMSC Officers and/or suspension of all LMSC Sponsor activities (potentially including, but not limited to, new and modified PAR approvals, Sponsor balloting, approval of standards, meetings, etc.) as described in IEEE SA Standards Board Operations Manual 5.3.6.

[This resolution supersedes the resolution from March 2015.]

If PatCom or the SASB becomes aware of an asserted potential essential patent claim for which an Accepted LoA (on the IEEE SA Standards Board approved patent letter of assurance form) is not on file, the information will be shared with the relevant Sponsor(s) and Working Group.

The participants in the development of the standards project at issue should be cognizant of the fact that there is not such an Accepted LoA on file, and that the SASB will take that fact into account when determining whether or not to approve a standard. Accordingly, such participants may wish to consider alternative technologies.

In addition, the SASB reserves the right to withdraw an approved standard should it be determined that market implementation is being hindered by the assertion of essential patent claims in the absence of an Accepted LoA.

The IEEE SA Standards Board directs PatCom to create an FAQ addressing the above resolution, which will include the foregoing three paragraphs of text without modification in the answer to the FAQ.

Any requests to PatCom for consideration of whether the IEEE SA Standards Board should approve P802.11ah notwithstanding the fact that there is an asserted potential essential patent claim for which an Accepted LoA (on the IEEE SA Standards Board approved patent letter of assurance form) is not on file shall be referred to the IEEE SA Standards Board without discussion at PatCom.

If PatCom or the SASB becomes aware of an asserted potential essential patent claim for which an Accepted LoA (on the IEEE SA Standards Board approved patent letter of assurance form) is not on file, the information will be shared with the relevant Sponsor(s) and Working Group.

The participants in the development of the standards project at issue should be cognizant of the fact that there is not such an Accepted LoA on file, and that the SASB will take that fact into account when determining whether or not to approve a standard. Accordingly, such participants may wish to consider alternative technologies.

In addition, the SASB reserves the right to withdraw an approved standard should it be determined that market implementation is being hindered by the assertion of essential patent claims in the absence of an Accepted LoA.

The IEEE SA Standards Board directs PatCom to create an FAQ addressing the above resolution.

Any future requests to PatCom for consideration of whether the IEEE SA Standards Board should approve P802.11ah notwithstanding the fact that there is an asserted potential essential patent claim for which an Accepted LoA (on the IEEE SA Standards Board approved patent letter of assurance form) is not on file shall be referred to the IEEE SA Standards Board.

RESOLVED, that the Standards Association Standards Board (the “Board”) hereby acknowledges and accepts the report of the Patent Committee with respect to the modification of Section 6 of the Bylaws of the Board in the form attached hereto as Exhibit I and hereinafter referred to as “Draft 39”; and it is

FURTHER RESOLVED, that the Board hereby approves the modifications to Section 6 of the Bylaws of the Board as set forth in Draft 39; and it is
FURTHER RESOLVED, that the Board, in accordance with Clause 5.1 of the IEEE Standards Association Operations Manual, hereby recommends that the Standards Association Board of Governors approve Draft 39, with such modifications as the Board of Governors deems necessary, advisable, and/or appropriate, and subject to the receipt of a favorable Business Review Letter from the United States Department of Justice.

The SASB approved the creation of a new Type 2 SCC – Transportation – with the following scope:
Lead the coordination of IEEE standardization activities for technologies related to transportation, especially in the areas of connected vehicles, autonomous/automated vehicles, inter- and intra-vehicle communications, and other types of transportation electrification. These technologies include but are not limited to Mobile Apps, Sensor Networks, and Communications that allow human to vehicle, vehicle to vehicle, vehicle to infrastructure, vehicle to platform, and vehicle to everything exchange of information and data. Where standardization needs exist, the SCC will develop guides, recommended practices, standards, and common definitions of terms.

The SASB officially recognized the IEEE Technical Activities Board/Technical Committee on RFID Standards Committee, to be abbreviated as TAB/CRFID, as an official Sponsor.

AudCom will inform Sponsors and Committees that all P&Ps submitted on or before 15 May 2014 may use either the 2012 or 2013 Baseline documents, and that all P&Ps submitted 16 May or after shall use the 2013 Baseline documents.

The SASB officially recognized the Electron Devices Society/Microelectromechanical Systems Standards Development Committee, to be abbreviated as ED/MEMS, as an official Sponsor, in accordance with IEEE SASB Bylaws clause 5.2.2, bullet d).

The SASB officially recognized the Voting Systems Standards Committee of the Computer Society, to be abbreviated as C/VSSC, as an official Sponsor, in accordance with IEEE SASB Bylaws clause 5.2.2, bullet d).

With the exception of IEEE 1680 related appeals, the SASB suspends consideration of any current or future requests relating to IEEE EASC activities until working groups for its open PARs are formed and work begins using the Policies and Procedures supplied by the SASB in December 2012.

The SASB approved the Administrative Withdrawal of the Dielectrics and Electrical Insulation Society’s Policies and Procedures due to the lack of progress since expiration of their existing Policies and Procedures.

The SASB directed that the C/EASC WG P&P, as revised by the SASB, be used immediately by all EASC working groups for at least one year.

An SASB Oversight Committee for C/EASC activities will be created by the SASB Chair and serve until disbanded. The Oversight Committee will conduct elections for new working group officers for all C/EASC WGs, in accordance with the C/EASC WG P&P.

The SASB disbanded the SASB Oversight Committee and approved DySPAN-SC as a Sponsor.

Pending the approval of DySPAN-SC P&Ps, DySPAN-SC shall operate using the existing COMSOC-SB P&Ps, with the substitution of DySPAN-SC in the places where COMSOC Standards Board is referred to as the Sponsor.

The P1900.X projects were transferred from COMSOC-SB to DySPAN-SC.

The SASB officially recognized the Power Line Communications Standards Committee of the Communications Society, to be abbreviated as COM/PLC, as an official Sponsor, in accordance with IEEE SASB Bylaws clause 5.2.2, bullet d).

The SASB approved the request that the following projects, sponsored by ComSoc, be transferred to COM/PLC as they deal with PLC related topics:

• IEEE 1901^TM
• P1901.2^TM
• P1905.1^TM
• P1909.1^TM
• IEEE 1775^TM – Co-sponsored with PES

The SASB SCC41/1900.4 Oversight Committee is authorized to share appropriate information, in confidence, with the COMSOC Standards Board to assist with its integration of DySPAN activities into COMSOC.

Whereas the Communications Society Standards Board is currently the Sponsor for all projects previously sponsored by SCC41, the SASB decided that consideration of the establishment of DySPAN-SC as a Sponsor be deferred until the Standards Board is satisfied that the proposed Sponsor will operate in a fair and open manner and perform proper oversight of its projects.

The SASB is satisfied with the operations of SCC41, and therefore new PARs may be submitted and approved. The SASB therefore removes the prohibition of new PARs for SCC41. The SASB expects that the process changes implemented in order to comply with the previous resolutions will continue to be observed. The SASB also approves the continued authorization of an oversight committee with the retention of any powers previously granted to the committee.

The SASB authorizes that all activities of SCC41 be transferred to the Communication Society Standards Board and that SCC41 be disbanded. As indicated by ComSoc, the ComSoc Standards Board is expected to cooperate with the EMC Society on projects of interest to the EMC Society. The SASB requests a report from the ComSoc Standards Board at the March 2011 SASB meeting describing the status of the transfer of SCC41 activities.

Move that the SASB instructs the 1900.4 WG to designate the entire WG as the comment resolution committee for P1900.4a^TM.

Move that the SASB delegates to the Oversight Committee approval of a waiver of the requirement that the interim chair of the 1900.4 WG be an entity member.

Move that all activities of C/IA P1667^TM be suspended on 1 July 2010 unless and until their L50-S report is filed.

1900.4 WG/SCC41: Recommendations:

• Request SCC41 Chair appoint a new chair for the 1900.4 working group.
  • WG Officers are subject to approval of SASB Oversight Committee.
• No meetings of 1900.4 Working Group after the effective date of the resignation of the current WG Chair until new WG Chair is approved.
• No new SCC41 PARs will be approved until the SASB is satisfied with the operations of SCC41 and the 1900.4 working group.
• The SASB endorses the SASB Oversight Committee (OC) directed P&P changes and authorizes the OC to mandate additional modifications as deemed necessary.

SCC41:

• SASB empowers an Oversight Committee for SCC41 and the 1900.4 WG to assist those groups in implementing the following recommendations and to provide ongoing guidance.
• SASB instructs SCC41 to continue to follow its approved P&P (version 10.0, accepted by AudCom 3/27/2008).
• SASB instructs SCC41 to maintain current leadership (willing to serve) at the SCC and WG levels in all positions until further notice, for the purposes of stability.
• SASB instructs SCC41 to stop its default practice of waiving meeting fees for leadership.

1900.4:

• SASB will provide a mentor for the 1900.4 WG to help develop P&Ps compatible with the draft entity baseline WG P&P.
• SASB directs 1900.4 WG to stop the practice of creating ‘candidate text for draft standards’ and begin to create a draft standard.
• SASB supports, appreciates, and directs the 1900.4 WG’s vote to use a 75% approval rate for all technical decisions.

Implementation for Obligations of the Participant policy will be scheduled for 31 March 2010 to coincide with the implementation of the copyright policy.

Move that the SASB support the SCC18 Chair in the execution of his plan to review and re-ballot the draft SCC18 P&Ps for consideration by AudCom by 31 January 2010, and to begin reconstitution of SCC18 by 1 February 2010.

Accept the results of the SCC27 disbandment ballot and disband SCC27 effective immediately and transfer responsibility of existing SCC27 projects to UFFC.

Instruct the P1900.4 WG to use the April 2008 P&P until new WG P&P are duly accepted by SCC41 and the SASB.

Instruct SCC41 to follow its accepted P&P and governance documents in its operation and formation of subgroups.

Move that the activities of the C/IA P1667 WG will be suspended on 22 June 2009 unless and until their L50-S form is received and accepted by staff.

• Based on the recommendation from SCC38, disband SCC38.
• Move P1622 sponsorship to the Computer Society.

Move that the IEEE SA Standards Board delay the distribution and publishing of IEEE Std. 605^TM-2008 and direct the Sponsor to address the technical concerns raised after the December approval through either a corrigendum or a revision project.

Move to support Communications Society Standards Board’s establishment of a P1901^TM Oversight Committee; further the SASB supports the Oversight Committee’s establishment of a financial model to address expenses in connection with this oversight, the cost of which will be levied on the IEEE P1901 working group.

SCC10 and SCC36 have been disbanded, effective immediately.

The Standards Board directs SCC18 to complete work on the revision of its P&Ps, submit them to the SASB Audit Committee, and have an Audit Committee status of at least ‘visibly under development’. If this status is not achieved in the December 2008 SASB meeting series, the Standards Board will consider suspending SCC18’s external representative privileges at its December 2008 meeting.

Move that the IEEE SASB endorse the following three recommendations of the SCC Coordinators on SCC10.

• Take steps to disband SCC10
• Change a key IEEE Standards Style Manual rule regarding definitions
• Ask ProCom and AudCom to develop guidelines and best practices

Move to suspend the activities of SCC10 until their L50-S form is received and accepted by staff. Following acceptance, the work of the group will be reinstated. During this suspension, staff is directed to perform the duties of mandatory coordination.

Move that the activities of RAS be suspended until their L50-S form is received and accepted by staff. Following acceptance, the work of the group will be reinstated.

• Society Liaisons to the SASB (PDF)
• Standards Board Bylaws
• Standards Board Operations Manual
• All Policies and Procedures
• IEEE SA Board of Governors